Sir Camalot. Thanks for the reply. I appreciate it !

Not sure what your saying ? Yea I am in need of math data points I.E IJK to measure slop - curved surfaces. I can actual type in the cosine error for the probe by hand when it's a simple angle. But it was being done through mastercam by a person who had extensive knowledge of the software.

Thanks. I see the XYZ but not the IJK ?

Long term we plan on going with a software DMIS software package. Thanks for the recommendation.

I have a very basic tasks which is very difficult for me to do as I have zero knowledge of mastercam. Person who was performing this task is no longer with the company. Coordinate Measurement Machine (CMM) which I program, software package does not accept-read math data directly. To program this machine with math data, one must pull math data points. I.E XYXIJK. My task is simply to pull points and no more, utilizing Mastercam software. I can pull up the drawing in master cam. Dimension simple feature but that’s the extend of Mastercam knowledge. If possible, I would like key stroke by key stroke direction to : Pull points Print points out I then can hand type the XYZIJK math data points into my CMM software. e-mail is [email protected] 12483617658