That was my first thought to but that outputs a % between every tool

%
G10L10P21R7.504
G10L11P21R0
G10L12P21R0
G10L13P21R0
%
G10L10P22R5.815
G10L11P22R0
G10L12P22R0
G10L13P22R0
%
G10L10P23R7.129
G10L11P23R0
G10L12P23R0
G10L13P23R0
%
 

Thanks for the thought thou!

This isn't exactly a  Mastercam post question but I'm hoping someone can help me.  We just received a new tool setter (standalone unit) that outputs tool offsets to the machine via Ethernet.  Everything works great except the post doesn't output a (%) symbol at the beginning of the program so the machine doesn't input the first line of code.  I'm looking for some help editing this to get an (%) symbol to output at the beginning of the program.  Fanuc 3XiB controls.  Thanks

EN :|LANGUAGE:ENG|
GEN :|DIAM/RADIUS:RADIUS| |DIFF/ACTUAL:ACTUAL| |MILLING/LATHE:MILLING|
GEN :|MM/INCHES:INCHES|
DATA:G10L10P|U:(01)|R|Z:"##0.0##"|
DATA:G10L11P|U:(01)|R0
DATA:G10L12P|U:(01)|R|X:"##0.0##"|
DATA:G10L13P|U:(01)|R0
END :%

Yes what a great opportunity and perfect timing for helping those in need right around the holiday season!

Thanks Colin!

 (P.S. I just sent you over my information)

Thank you will do

I have a job that I need to program a metric tap (which is unusual at our shop).  I selected a metric tap (when in inches mode) and thank the lord I ran the tap a couple inches above the part on the first hole because it wouldn't have been pretty.  I then read online that in order to program a metric tap in inch mode you have to use an inch tap and convert the tool geometry to metric.  is this correct? or is it possible to select and use a metric tap when in inch mode?

Yes this drives me up a wall!

I've never had this issue until X9 but I get it daily now.  Doesn't seem to affect anything, more so just a huge annoyance. Drives me nuts opening up proven files and seeing that. 

That isn't a book its a home use version of Mastercam software