When receive was done, an error message “Cannot save file!” appeared (see the screenshot of attachment). "Transfer failed: The system cannot find the path"

The NC files generated by X2 MPFAN.PST, main and sub programs are in a same NC file. How can I modify the post-processor that make it generate main and sub programs into individual files?

I have used the "Contour Toolpath", "Rotation Axis", "Axis Substitution" and "Substitute Y axis" for machining before, there is no problem. Now because the work piece's diameter is too big, I therefore must face the work piece axle center to Z axis and uses aggerate head to let the cutting tool's direction as right side view for machining, but there is a problem that the axis substitution has not substituted for the Z axis. Is there any solution for this problem?

X and the X2 version I all have defined aggerate head in Machine Definition Manager, The method is all same.I find that in the X2 version if check the option "Translate NCI coordinates to Machine View with aggregate the" in Control definition , then the problem that cutting tool direction is error will occurred. But it is no problem in X version.Is there the solution. Thanks

Thank you the reply, uncheck "Simulate Rotary Axis." Invalid, the question or exists has not solved?

I have in X version use Angle Aggregate to machining the 2D contour toolpaths not to have the question, similar method use when X2 version the Backplot cutting tool direction is not right. Is in the X2 version something must be set. ThankS