Hello does Mastercam have a feature where it can make tabs and slots similar to solidworks to make assembly easier? we are using 2022 at the school. Thank you Mike

The laser won't accept the file. It gives an error saying that it is not the correct format.

Thanks for all the replies. I've been trying that but it seems to lose its position for some reason when it comes into coral

This is what I have created with all the levels. I just want to print level five only. If I import this into Coral draw it will bring all levels in. Jig for pencil engraving.emcam

Hello All I need is basic 2d vector cutting and rastor engraving on flat surfaces. Example Im going to bring in the grade 3s and we will engrave their names on pencils. each kid's pencil will be on a different spot on our pencil holding jig.

Hello I teach at a 7-12 school and we have purchased an Epilog laser. We have used Mastercam for about 15 years now and are up to 2019. we are trying to print directly to the endgraver but it says that it needs a raster or vector input. Has anyone done this? I know we can save it as a dxf and import it into Coral Draw but it is a real pain as it will import all hidden levels as well and we end up with info which we do not want. I would love to be able to directly send the info to the laser from Masteram directly. Any help would be appreciated. Thanks Mike