multiple session all the time here without problem

it happens here too when the battery empty, just changing the battery solving the problem,

and no need to reboot the control, after changing the battery, just call for the same probe number again , the probe will got a signal and the alarm will go away

making the probe not to rotate is for safety, and its good thing,

imagine that a programmer will mistake and choose the probe to rotate at 10000rpm

it will coast a lot more than a tool

I used one from Roland, it was touch not laser, it gave me good results.

I saw nextengine in action , it is simple and it works

if you want to scan part from all sides there was manual alignment to connect all the images.

as Marshal said , its cheap and work fine and it will give you the accuracy you want.

check there site it have standard software with the scanner and they have software that will be extra, you need to check your needs.

Hi Ray

there is different types of scanning, it depend on accuracy you like and the size of the part

there scanners from company Roland , they have laser scanner too , check also FARO scanners they are very cool.

check also nextengine scanner.

the scanner usually come with a software that will give you the surfaces.

there is a lot of types and you need to chose the one that will give you what you need

I see you are wrong that the thread is not deleted yet ASAP as you said.

hope you enjoy your new super CADCAM system for your super parts in your super company.

hope its the last time we will here from you about how much NX is SUPER in Mastercam forum.

Hi Tim

is the filtering is on?

its in the Total tolerance / line/arc filtering settings.

what toolpath you are using? what tolerance?

which ver of mastercam?

5 time longer is not a great job for sure.

there was a lot of topics about the High speed, if you try the search you will find a lot of topics.

any way you have to be more clear about your problem and what you need.

like: what speeds and feeds you use now?

what machine? what type of work?

what you mean its slow? is the machine slowing down in some area or its slow all the time?

I have fanuc 18i and it have the option of SHPCC

I use it only with some kind of parts

and welcome to the forum

with that long cutter, the 3000 rpm is reasonable now

I have 150mm cutter 6mm dia, I cant go for more than 5000rpm when I need to go to 100mm depth.

more rpm = more vibration

3000 is slow for aluminum, I will go for 10000 if it possible with your machine and will go for 2000 for feed as start, it depend if it rough or finish.

no problem here

what kind of entity? chains, solid , surfaces?

I will try to contact them today for International shipping

too bad that there no International shipping

the price is very good

Hi David

as chris said it is in the Arc Filter / Tolerance

there is a Toolpath fillet

you can put the radius you want to make a radius on the sharp corner, but it will make the radius on

x,y and z also

not only x,y as you want

Hi malo

if you make a search there was several posts talking about the colant

here we use blizer , most of the work in aluminum

it was been covered

http://www.emastercam.com/cgi-bin/ultimate...t=026183#000000

for me I use climb cut 99% for the work I do on the cnc machines.

better for tool, better finish

you can e-mail it to me

yes you can choose a point as center point + outer chain and a surface in blend toolpath

if you update from X3 the 4th post on the form explain how to update it,

and if you just install MU2 , no need to update

T651 is a plate as I know

with cnc work, you will not notice big different

but if you have long holes like cooling holes

use only T651, cause there is a big different in drilling it

never

no problem here

I have this card and no problem at all

Good news

the problem solved

chris sent me a file that solved the problem

Thank you Chris