In our case, its a drawing generated by IBM CAD.

Its so old, I think the only thing older might be sliced bread.

I wish, but its not available. Sorry

I am not aware of any setings in MAstercam for this.

You might be able to hard code it in the post - but then it's always the same.

HTH

Yeh, the sg80, sg81 and sg83 are screwy-but it works.

Remember, make a backup copy of your post first!!!!

HTH

I remember te first time our oldest daughter had mozzerella (sp?) sticks. She started choking and I pulled a hunk of cheese outta her mouth that was a foot long - well it seemed like it anyway.

Consider it done!!!!!!!!

Gongrats Paul,

I hope all goes well for your wife and baby, and you when they get home!!!!!!

Thank you. Gonrats to you also!!!!!!

Thanks again everyone. Your thoughts are greatly appreciated. When the wife gets home, I will be sure to share this thread with her.

Levi Gerrit - was our choice for a boy.

Right now she is 3 to 4 hours.

The other three were sleeping through the night by 3 months - lets hope this one does the same.

Now that our family is complete, I will try to get a picture for the forum family thread.

Thanks again!!!!!!!!!!

Thank you all.

IT’S A GIRL !!!!!!

Emma Belle Newman

06/08/04 3:48 PM

7 lbs. 1 oz. @ 20”

She and my wife are both doing very well and should be coming home Thursday AM.

Thanks Ron.

Tylor turned 10 on May 2nd.

Brooke will be 6 on November 2nd.

Alexis turned 3 on April 19th.

Though kids can be a big challenge sometimes, the reward is even bigger.

Hard to beleive its that time again.

Tuesday morning we will be going to the Dr. to induce labor. My wife has about 2 weeks to go, but the fluid around the baby is a little low which causes extra stress on the baby.

Everything is packed up so we can leave as soon as Grandma and Grandpa get here in the morning to stay with the other kids.

Its gonna be a long day tomorrow.

Troy teh Lookin forward to the 2AM feedings!!!!

Good Luck. I hope all works out!!!!

Get me one too, will ya. Oh and make sure it's a winner.

Just e-mail it to me, I'll split it with ya.

Thanks for the input fellas. Maybe we can do what we want with X.

Is there a way to change the defaults.

I use this all the time and have to change 3 of the parameters everytime I start MCAM!!!!!

Thanks,

Ive been playing with this a little also. The other day I was using only one monitor and couldnt find the file get box, I thought I screwed MCAM bad!!!!!!

Once I hooked up the other monitor, there it was - boy was I relieved.

Seems it can get a litle confusing going from 2 monitors to 1.

JM2C

Thad,

You da man !!!!!!!

Just did - it only changes font size on the main screen.

Thad, lets try 10.

I'm not certain what I want.

Sounds like there is a way to change it.

Is there any way to change to font size in the operations manager, file get and file save.

I have tried changing several things in Windows, but nothing seems to work.

FWIW I just received a Dell Precision M60

Pentium M 1.70 GHz

Windows XP Pro

1GB, DDR SDRAM Memory

60GB ATA-100 IDE (7200 rpm)

NVIDIA® Quadro FX Go1000™ graphics w/128MB

So far it works great

I would love to - but the commute would be a killer

To be able to learn from someone with the knowledge you have.

You probably forgot more then I know.

Good Luck

I'm pretty sure it does retract out of the hole also.

I worked with a '95 Sabre 750 with an A2100. On a good day you could fire that thing up first, start up all the other machines and have them running before the 750 was ready to align.

On a bad day - you might have to do it a couple times.

On a real bad day - it would go the wrong way while aligning it, so it would pass the hard stops. As Nominal said, thats an all day job recovering from that.

I worked with an A2100 for 3 1/2 yrs.

If memory serves, those drill incremental from the ref. hgt. Its a pain until you understand it, specially when ref. hgt. is below Z zero.

Once you think you have it, then you will second guess yourself.

HTH

Once they are changed in an operation, I dont think they will carry over to the next op.

You could change the defaults if this is something you change on every operation.

HTH

Its there. If you try to use it, it will ask for an access code.

Nope - its an option!!!!!!!!!