yes it has a chiller. the water level hasent changed, Ill take a closer look at it. the larm im getting is #21 emergancey stop. I go to jog move from part. and start tool all over again. It stops in light cut and heavy cuts. Thanks for all the help!!!!!

I have the metal strap across the cards, but they still give me problems. some times i reseat them 2 or 3 times I even sprade contack cleaner . but still have same problem

my cabinet dosnt have any vents but Im abought to put some in it. The fans are working good. it just circulates the hot air if door is closed.

I have a fadal 4020 mill Does anybody have problems with the cards ( x,y,z cards ) having to reseat them all the time. and having to open the cabinet door so the motor cards dont over heat. thanks

instead of slot milling. I was told to try plunge mill. but to do this do you use a drilling cycle.or what. do i haft to do the math to figer out the step over and how many times. or will mc figer it for me. Has anyone else tryed this please let me know thanks

I tried to change it in the offsets page but it still post in positive x.. I checked my lathe (romi) to see how it looked in the G-code. and it is positive! But my tools work from the bottom or operator side. os i may be asking the wrong quiston. master cam shows tools working from the top. can i change this to what my lathe does. this cnc is a flat bed lathe. runs like a manual ... thanks

I got a new machine. A romi 20 x 60 lathe. I have 2 post for the romi. but i need to change the x value from a positive to a negitive. to run right. Im just learning MC lathe. any help to show how to change this is verry thankfull.

do any of you have or run a romi lathe. My qustion is. I need to find a supplyer for the duplomatic 8- position turret. (drill,boring blocks) turrner supply is looking in to it. I thought i"d try and ask here. this forum rocks on hard to answer qustions. Thanks for all your help.

I just whant to know how good or bad the machine is before i buy. whats your input

has any one out their own or run a romi lathe. Do you like it, Any complants. Im looking at the m 20 x 60" And is their a post for it. Thanks for all your help

how many parts do you need. i can have it excuted. or have a mold made. and run the parts for you...

if you ask the Fadal dealer abought a remanufactured mill. i heard their as good as a new one. If you want a new controller tell them you want a colar screen. You get a new one for $500.00. the price should be around $35,000

I BOUGHT A NEW FADAL A YEAR AGO. THAT WAS A QUSTION I ASKED THE FADAL PEOPLE. THEY SAID ( NO ) . YOU COULD CRASH THE MEMORY IN BOTH MACHINES . THEY SAID IT WOULD CRASH BOTH MACHINES. SO I USE A COUMPUTER AND JUMP BACK AND FORTH..

Yes the zero position. Thanks for the help

How do you change the home position? once ypu have drawen your part. Im new so dont get mad at the qustion. thanks for your HELP