I think you put me the right direction to finding a solution, will update when I get the result I am looking for. Thank you guys!

That is what I am looking for, just need the p1, p2, and p3 for the offsets

I get the same result with NCI

I believe so, if I don’t use transform rotate it will post the indexes correctly.

I am trying to rotate a tool path around the x axis for a rotary program in MCAM 2023. Currently it posts the code correctly but does not post out the indexes, so I have to manually A0, A-120, and A-240 for each position that runs the sub routine. I have attached a screen shot of both parameter pages and sample code of what I get and comments on the desired output. I am using the MP Master post processer. Any help would be appreciated.

Thanks Josh! That did the trick.

I am having the opposite problem of the original poster. I need to add 20 to the diameter of every tool. I have been manually changing the Dia. value in the toolpath. Attached are photos of my control definition and a pic of the code my post processor is producing (I am using the MP Master post processor). I am programing for a Mori FM-1 3 axis mill, it lost its all of its parameters a while back. After reloading everything thing, it requires +20 to all the dia. First time post, my apologies if I posted in the wrong spot, this was the most relevant thread I found. My MCAM is legit, Maintenace is current.