rjoyner
-
Posts
14 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by rjoyner
-
I looking for a formula for turnning to get a Depth of cut. I have everthing else I think: Surface FT/Min = 1200 RPM = 9167 IPM = 64.17 IPR = .007 Work Piece is .500 WHAT IS THE FORMULA FOR THE DEPTH OF CUT??? Can it be done?
-
Which is better? And why?
-
How do I create an octagon?
-
Is there away to print out a soild drawing on paper?
-
What is the difference?
-
Can it be done and how?
-
Can someone tell me if solids can be joined and how? please
-
I'm sorry it's A2
-
I running a #25 drill at 2700 rpm feeding at 5.1 and drilling .460 deep. Tapping it with 10-24 tap at 720 rpm feeding 30. Also tapping a pre-drilled hole with an 8M x 1.00 running at 249 rpm feeding at 9.8 for a .660 deep hole. Can I run faster on any of this? Is it to fast? Or what?
-
Is a G54 needed for every tool change? Ron
-
I'm trying to use a HAASVF post and I'm having problems with it. How do I setup the post to put an EOB in my program?
-
I did that and it said "THIS FEATURE IS NOT SUPPORTED BY YOUR PROCESSOR (SEE NUMBERED QUESTIONS 161-167 IN YOUR POST). What does the mean?
-
I'm using Mastercam 9 with a HAASVF post for the HAAS mill.
-
At work I use G54, G55 and so on in every program I run. I'm new to Mastercam and I can't seem to get Mastercam to put a work offset code (G54) in when I run my post. Can it be done, if so how?