Hi i tried to post a G code using the 4 th axis substitution but the A axis coordinates aren't correct when using the transform toolpath every thibg is good but with unroll function the g code is not correct . please help to fix that thank you

glaid to hear this . but some employers dont forgive errors

i will be grateful if you suggest some trainings, or online trainings,

Thank you , your help is so precious just a question, i want a training for mastercam advanced mill, how can i get it and what do you suggest?

i am beguinning with 3D advanced mill , there are many kinds of tool paths. so how can I choose the right strategy i have received a training from vt pros , but it focussed in geometry creation rather than tool paths. do you suggest a trainig ? when working with surface high speed , step down are huge, in our university we work with 0.5 to 1 mm as stepdown so i should avoid them .

thank you this is the piece , may be some one can told me how to machine this . depouille.mcx-8

how can i post a file

plase how can i machine pieces with steap walls like in this picture http://www.zupimages.net/viewer.php?id=16/44/3f3e.gif

haha , pretty answer , but really it was a bug , i have done nothing just restart mastercam .

i use x8 it was a bug , and i fixed it for surface rough contour , can i use multi passes in x direction like in countour 2D , or just one passe?

Hi when working with surface rough pocket , in cut depth , when using absolute ,the minimum depth is in top .in plane manager i have maked the top of stock as my z zero so i should have minimum depth zero, maximum depth -20 but the tool path is below the part,. to fix that i have to take minimum depth 20 and max depth zero mastercam still work with an other plane manager and outputs g code with wrong cordinates how can i fix that

thank you Pip when running a program from dnc mode , if i erase this program from my computer it still running or stops,? did dnc mode make calculation of radius compensation like automatic mode,why i can not make changes to the program in dnc mode

IN MY FANUC cnc , i can run program in DNC mode and automatic mode does any one know the difference between them ? and when using it They told me program in automatic mode is registred in the machine memory and you can make changes in it however , program in dnc mode is read from the computer and you can not make changes in the program, also it is used for long program

HI every body i want to ask about the best cautting method to have this 8 pieces from one stock , i can not attach the cad file so you can see it sould i work with countour operation , or pocket operation, and what about the 30 degre chamfer

HELP please

hi i have a problem when running a canned cycle in mastercam G71 or G72 our fanuc oi lathe make an error with G42 , G41 when i analyse the program , i notice that radius compensation is inside the canned cycle. when programming manually i always put the g42 ang G40 outside the canned cycle how can i repair that . is there a solution to output the canned cycle with compensation putside the canned bloc? other question if i have to work with radius compensation shoul i put the radius in geometry offset , or in both geometriy offset and wear offset? when working with wear , shoul i put the radius in geometry offset and wear offset or put zero pleaze i need your help

thanks even in g code there is an error with widh we used to program manually with canned cycle and g41 g42, we dont use wear so the best solution is computer or wear ?? in configuration i have found wire backplot compensation and it is checked how can i fix that

hi every body , this is my first particiaption in the forum , and i am glad to join this community i am trying to do a canned groove with od groove center narrow, and the finish outpout is with g41 G42 but when i see the backplot or the g code , the tool path isn't correct , it dont take into accont the widh of the insert you can have a look at the picture below, how can I resolve this problem