Haroon
-
Posts
21 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Haroon
-
-
Sorry Trepanning
-
-
I am lazy, I demand voice activated functions, and I would like to say create line, point, copy, etc; and MC will respond. No more mouse clicks, Please incorporate it in X3 MR1?
-
Thank you In-House, a great education place not only for MC, but also for all the industry related aspects.
-
Thanks for all the help and good luck in your new position.
-
Welcome to the forum
-
-
thanks CAMmando.
-
Hi everybody
I made a search in the forum for the EMUGE Thriller BGF tool, but I didn’t find enough information, how good is this tool?
What are the recommended feeds and speeds for aluminum and D2 steel? they offer 2 and 3 flute tool which one to choose?
Thank you
Haroon
-
-
What about water jet? If your tolerances is within .001” a good water jet machine will be my choice , this is my 2 cents .
regards
-
Lee
It's CD$. From Dell Canada 7500 CD$ with Hi-Performance PERC320 SCSI RAID Card ,man this workstation is amazing , go with SCSI HD they Worth the money , good luck
Regards
-
Gilberto
Sir you can't beat my Xeon
Dell precision 670 3.6Ghz Xeon 1 Mb cash
3 GB Ram pc3200 ECC
3 X SCSI 73 GB 15,000 rpm HD raid 3
Nvidia Quadro FX 3400 256 MB
Regards
-
Check this, it may help you
-
jack
thank u very much , i will have my supervisor with me when i will change the parameters
( resjun , james , millman thanks ) i really appreciate your help friends.
regards
-
Jack Sir,
today i checked the machine parameters
and they were f91 00010010
f92 00101000
f93 00000000
do i have to change anyone of them ????
regards
-
jack sir ,
thank u very much , i will check the machine parameters on monday , hope it will work.
regards
-
thank u sir , i will do my search .
regards
-
Sir,
I am an avid reader of your magnificent forums, it’s really a great place to learn from the masters…. thank u everybody in advance.
I have a problem with setting up the tool length offset for a Mazak vmc with m32-b mazatrol control, I am using the EIA command page to get G54, 55 and mc 9.1 to generate the tool path. And I am getting the program and the work offset 100%. But I have a problem in getting the tool length offset.??? I am using the same procedure I used on g54, 55…. but the machine keep giving me wrong tool length offset????
i changed the g codes in the program from g43 h1 to g44 h1 and I put the tool length offset in + and still I am getting the same wrong values????? this is the only way I know to set up the tool length offset.
(this is my first time in front of mazak machine and the boss pushing us hard to use mc9.1 & eia on this machine…) any help please….. and sorry for my bad English
Looking for 3D models to play with.
in Industrial Forum
Posted
Me too Please.
Thanks