Me too Please. Thanks

Sorry Trepanning

Try Terpanning http://www.trepanningspec.com/NewFiles/trpng.htm

I am lazy, I demand voice activated functions, and I would like to say create line, point, copy, etc; and MC will respond. No more mouse clicks, Please incorporate it in X3 MR1?

Thank you In-House, a great education place not only for MC, but also for all the industry related aspects.

Thanks for all the help and good luck in your new position.

Welcome to the forum

Chao check this link http://filext.com/detaillist.php?extdetail=ECW

thanks CAMmando.

Hi everybody I made a search in the forum for the EMUGE Thriller BGF tool, but I didn’t find enough information, how good is this tool? What are the recommended feeds and speeds for aluminum and D2 steel? they offer 2 and 3 flute tool which one to choose? Thank you Haroon

Mike www.flowcorp.com/waterjet-resources.cfm?id=268 Hope it will answer your questions . Regards

What about water jet? If your tolerances is within .001” a good water jet machine will be my choice , this is my 2 cents . regards

Lee It's CD$. From Dell Canada 7500 CD$ with Hi-Performance PERC320 SCSI RAID Card ,man this workstation is amazing , go with SCSI HD they Worth the money , good luck Regards

Gilberto Sir you can't beat my Xeon Dell precision 670 3.6Ghz Xeon 1 Mb cash 3 GB Ram pc3200 ECC 3 X SCSI 73 GB 15,000 rpm HD raid 3 Nvidia Quadro FX 3400 256 MB Regards

Check this, it may help you http://www.digi.com/pdf/vert_ia_CNC_DNC.pdf

jack thank u very much , i will have my supervisor with me when i will change the parameters ( resjun , james , millman thanks ) i really appreciate your help friends. regards

Jack Sir, today i checked the machine parameters and they were f91 00010010 f92 00101000 f93 00000000 do i have to change anyone of them ???? regards

jack sir , thank u very much , i will check the machine parameters on monday , hope it will work. regards

thank u sir , i will do my search . regards

Sir, I am an avid reader of your magnificent forums, it’s really a great place to learn from the masters…. thank u everybody in advance. I have a problem with setting up the tool length offset for a Mazak vmc with m32-b mazatrol control, I am using the EIA command page to get G54, 55 and mc 9.1 to generate the tool path. And I am getting the program and the work offset 100%. But I have a problem in getting the tool length offset.??? I am using the same procedure I used on g54, 55…. but the machine keep giving me wrong tool length offset???? i changed the g codes in the program from g43 h1 to g44 h1 and I put the tool length offset in + and still I am getting the same wrong values????? this is the only way I know to set up the tool length offset. (this is my first time in front of mazak machine and the boss pushing us hard to use mc9.1 & eia on this machine…) any help please….. and sorry for my bad English