ssmart94
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by ssmart94
-
-
Hi all,
I am trying to get a logo to import into mastercam for me to machine on a part,
using Rast2Vec.DLL however it does not appear to come out how i want it to with a lot of lines where there should be arcs and not very smooth,
Any help would be appreciated
Thanks
-
Not sure if this is the correct place to put this or not,
I have a log in for the mcam website so that I can access the downloads page as we don't have the USB.
when I log in it goes back to the home screen but doesn't actually log me in,
Any ideas how to fix this?
Thanks
-
Thank you both for your help,
I have managed to move the solid model,
another thing I am having an issue with is mating the parts,
I am using 2018 at the minute and position looks like the easiest way to go for this,
is there a better way to do this as the model needs to be moved after the mate.
Thanks again
-
Hello,
I have a fixture with 2 parts on a op10 and op20,
I have created a stock model from op10 and want to move it to OP20,
I haven't been able to do this using transform as there are no edges to select,
is there an easy way to do this?
Thank you
-
Found the solution,
it appears that I had updated my windows which also updated my graphics card,
I had to roll back my graphics card and then it would work fine.
-
-
Hi all,
I have both 2017 and 2018 installed on my computer,
when I go to open either of these it loads as normal and then only says initializing menus,
I really need this to be working for next week as have some work I need to do on it.
I have tried deleting mastercam 2017 and then reinstalling but this appears to have made no difference,
first 2017 went and now a month later 2018 has also stopped.
Any ideas would be greatly appreciated.
Thanks
Mastercam 2018 optirough stock to leave ??
in Machining, Tools, Cutting & Probing
Posted
Hi 3DGee,
The stock to leave in all the 3d toolpaths are found in the model geometry page.
Hope this helps