If you could copy your file to the ftp site I would gladly look at it.

Create new Operations and Geometry

Copies geometry from the original operation to each transform location and applies parameters from the original operation to each new toolpath.The original operation (geometry and parameters) is then deleted. This method creates several new independent operations with the same geometry and parameters instead of a single transform operation.

You mention you have a Transform toolpath.

Do you have the "copy new operations and geometry" option on? Do you have the "Keep this transformation operation" checked?

Did you check mark "Copy source operation"?

I would investigate the transform operations settings under the types and settings tab.

Please contact the reseller in Spain. They may be able to help you.

http://www.tecnocim.com/

James,

You are not eligible. However, we used to run a cool parts entries for our industrial customers. It was announced in a previous customer newsletter. If you really want to submit a part and get a gift bag of goodies give me a call and I'll put you in touch with the right people.

Will Slota

Educational Applications Engineer

1(800)ASK-MCAM

Are you a current student or teacher teaching Mastercam?

A big thanks to all the In-House folks for all they do and thanks to everyone who contribute here.

and again and again..... just not the same part please.

Just a reminder about our wildest part competition. We had some really great entries last year and are looking forward to seeing you and your students "Wildest" parts this year.

Please check out the link for rules, deadlines, etc.

http://www.mastercam.com/TeachersStudents/...rt/Default.aspx

Re. Update Manager patch:

After you install Mastercam X2, go here...

http://www.mastercam.com/Support/Downloads...X2/Default.aspx

Download and install mastercamX2-patch001.zip

Instructions

This patch is issued to address an Update Manager error:

Download "mastercamx2-patch001.exe" and double-click on it to run the installation. Make sure Mastercam is closed before running the installation.

I have seen a number of cnc or Mastercam clips on youtube, ifilm, myspace, etc...

Many schools also have their curriculum and or project links available on their school websites.

Would any instructors care to place a link to their program here?

Degmc,

I believe you have th ewrong HASP code.

Please contact our office at 1(800)ASK-MCAM

Thanks,

Right click on the rotary axis inside the machine definition and then click on properties. Set the Continuous axis type to signed direction, absolute angle.

Todd, I checked it out and it's pretty amazing. Good link!!

If you want to load the same template every time you launch Mastercam X2 then add it to the target string of your icon by rightclicking on the icon, left click on properties. Where the target string is listed as c:mcamx2mastercam.exe add a space and then the complete path for the template file.

The last time I spoke with Mr. Irving before the winter break it was my understanding that his post processor created clean G-code including most of his canned cycles. He wants to incorporate the canned facing cycle of his machine tool.

This is not the fault of his reseller. If any blame should be laid on anyone it should be me as I have not gotten a modification to him since I have returned from my vacation.

It is my understanding that someone in the post department is working on a modification to utilize the canned roughing operation for his canned facing cycle.

My apologies to Mr. Irving for the delay.

Sincerly,

Will Slota

Educational Applications Engineer

CNC Software, Inc.

"- Indexing and axis substitution are not multi-axis toolpaths, so mill level 3 still has a lot of usefulness on 4 and 5 axis machines. Only 4D and 5D toolpaths are affected by the change."

Indeed tool plane and WCS as well as 3+2 type toolpath operations can be created by the Educational versions including the student software.

In addition, the Rotary fourth axis toolpath is still available to our educational customers with out having to purchase the new multi-axis add-on.

We significantly reduced the educational price of our software a while back to the extent that if a customer were to purchase a seat with maintenance and multi-axis they would still be paying less than what they would have paid for version 9. Plus they get Design, Router, Wire, and Solids as well.

The Student software will not be able to create any of the "Multi-axis" toolpaths. They will have to create them on the schools seats instead of at home.

Jeff,

I've always liked these

http://cvddiamond.com/Benefits.shtml

FYI,

http://www.osti.gov/energycitations/produc...sti_id=20576480

Sure

Wait a sec, are you just pulling our leg? Why do you no longer "need" the jacket? Is it cursed???

Ooh, ME, ME, ME!

MINE! MINE! MINE! MINE!!!!!!!!

I want it so bad, I'll pay people not to bid on it!!

Mike, Please!!!!, gimme, gimme, gimme...

If I don't get this under my tree this year, I'm gonna be so

Thad,

Could you please zip2go and e-mail me an example or sample file in Mastercam X illustrating your "Cut to bad data" statement and the problems you are encountering with spline based toolpaths?

Billy,

I think drawing ANY "part" from a print can be accomplished faster or as fast in Mastercam by the right person as in any other CAD package.

While I know that CNC Software tends to stress the CAM aspect of our software our CAD capabilities have been my personal choice for over 15 years!!

[ 12-22-2005, 02:09 AM: Message edited by: Will Slota, CNC Software, Education ]

When updating or upgrading a Nethasp one MUST use the word document attachment that was e-mailed to you. Trying to type in the code will never work. If you are still having problems please call 1(800)ASK-MCAM.

There's an old tech tip...http://www.emastercam.com/ubb/ultimatebb.php?ubb=get_topic;f=2;t=000019

Not sure if it still works but worth a try.