Lets say I created operations on one view and then I figure out that I need to put those operations on another system view, Do I start over or can I move them? Mike

We have ran Smartcam but the parent company has made the call to go Mcam SH 500's w/15 pallets Under utilized for the vast machine it is I need alot of help with this program so you'll see me frequently, it is quite different from home. I need faster ways of starting and printing out doc's for the floor Any help there would be helpful Mike

I wondered if that was you, The piture did you no justice.... Do you not work for Mori?

Is this James Myette of Mori?

yes

External Edge breaks of .01

Help please..... In need of a blend Is there a way to throw fillet rads on toolpath without fillets on levels?

Marc; That is the ticket, really like that feature Thanks Mike

Am I doing this right? example: I have a .500 dia c-bore, and am using a 3/8 e.m. In the Lead-in/out box For the lead-in value, .375/2 - .200 for the lead-in amount, or is there a different way Thanks

Looks like that work Thanks

On the Job setup page, in the "tool offset register" How do I keep the Dia value set to 20? Thanks

The settings are correct. could this have something to do with the post settings?

We have Fanuc Controls I want g98 w/ r-minus value

New mcam user; When drilling; setting "Top of stock" and then choosing a "Depth", The code is drilling holes from Z zero? Any help? Mike

New mcam user; In drill a hole on different z planes, I choose top of stock and the depth of the hole,the tool drills ffrom z zero?