MILL IT
-
Posts
10 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by MILL IT
-
Is there a way to move inside and outside surface's to different levels without having to change the color of one or the other. I was thinking that v9 could do this but dont remember where it was at.
-
I have a job to machine to machine some G-10 material. I know nothing about machining this stuff does anyone have any info on this material.How well it cuts speed feeds any help would be very usefull. Thanks for the help
-
thanks for all the help that worked Charlie. this is a great place to learn alot of info
-
We have have a spindle go out that is our z axis. We have 2 spindles on the machine and we are using the w spindle until we can change out the z one. i have found and fixed the post to turn on the w spindle but i am having problems changing the z in the to post to a w. i have gotten alot of good info on here in the past so i was hoping that this would be a good place to start.
-
robk thanks for your help thats what i was looking for. thanks again
-
Is there anyway that i can copy the operations from one file into another file. I have used the nci important and it works good but i would like to copy everything in detail. I knew this would be the best place for help. thanks
-
this is a awesome place. thanks for all the info. where else can you go to get this kind of help. thanks again
-
we are machining 1/2 thick fiberglass with diamond cutters. we have alot of machining to do and breaking them about 1/2 the way thru the part. the job is running about 5 hrs. does anyone have any idea on a good cutter that will standup. max dia can only be 1/2. thanks for anyone's help
-
thanks for all the great info on the tool plane. i knew that any info that i needed someone here could help. you guys are the best. ron thanks for the name change info, but i will let that one go and just start over lol. thanks again for all the info
-
i have used this forum to get alot of great info but under a different name. i no longer work for that company so i had to get a different profile. my question is can i change tool planes and then regen my tool path to match that new plane. i have tring but with no luck. i always delete and redo. thanks for anyone's help with this problem.