emm, i'm a lil' bit lost here, what do u mean by BLOCK delete?

but the program is right, right?

hi guyz, how come when i make a surface operation the tool defination icon always in a grey colour (non-associative toolpath)?i cant figure out what's wrong. I'm using Mcam v7.2c

I'm using absolute, it's a HAAS CNCmachine, and i'm using MPFAN.PST

hi guyz, when i did a contour operation, in the program, there are several lines that has (/)followed by the code.exp; /N120 G90.... will this affect the program? this only happen when i use the contour operation.

Tq Thad. really glad u help me. now, how bout (imagine some kindda cone shape when viewed from one side) that has 2 different angle for the wall. one side is 45deg and the other is 60deg. the radius at the tip is 20. Do i have to use contour toolpath for one side and then do another contour at the other side?

hi guyz! i'm kindda new with Mcam xpecially when i was asked 2 use Mc v7.2c. i need help to create a toolpath for a radius(r20) wall(imagine the part as a box).really appreacite it if anyone can help me.

tq guyz! the prob is solved

Hello guyz! I need some help. i'm trying to import a solidworks "sldprt." into Mcam V7c. Can this version do it?