Iam at home now. Our fast typest is doing the menual work of getting about 1500 points into excel.

Only the print has the info. and the print is old.

Thanks for the help.

Finecut

-------------------------------------------

When driving in snow, for every mile of road, ther are 2 miles of ditches!!

Ok , here's is a work around.

As you know , canned cycles wont do this without a lot of help.

So you can use manual entry and a text file.

For boring try something like this:

S300 MO3

G0 Z0

G1 Z-1 F2.0

GO Z-2.0

G1 Z-3.0

.

.

G1 X-.01(LIKE A SHIFT BORE)

G0 Z.1

X0.

.

.

Got the idea ?

Now save it as a text file and use manual entry to input the code into your program.

Your post has to be set up in the comment field so the code will come out as code and not a comment.

Manual entry has 2 outputs. Code or comments. 1005, or 1006. You have to check the box that the post is set up for. some posts are not set up right. Here is my comment field:

pcomment # Manual Entry - COMMENTS (on a block by itself) 1005,1006

if gcode=1005, pcomment1 # Manual Entry Comment - 1005 - Codes

if gcode=1006, pcomment2 # Manual Entry Comment - 1006 - Comments

if gcode=1007, pcomment3 # Define comment with output line

if gcode=1008, pcomment2 # Define NC parameter comment - Operation comments

pcomment1 # Manual Entry - Codes - Without brackets

scomm = ucase (scomm)

n, scomm

pcomment2 # Manual Entry - Comments - With brackets and sequence number

scomm = ucase (scomm)

n, "(", scomm, ")"

pcomment3 # Manual Entry - Comments - With brackets and without sequence number

scomm = ucase (scomm)

"(", scomm, ")"

ptoolcomment #Comment for tool

tnote = t

toffnote = tloffno

tlngnote = tlngno

"(", pstrtool, *tnote, *toffnote, *tlngnote, *tldia, ")", e

pstrtool #Comment for tool

if strtool <> sblank,

[

strtool = ucase(strtool)

*strtool, " "

]

Use a g81 drill cycle at your center point and move the manual entry info into the g81 routine, and make sure you delete the g81 and the g80 code.

Finecut

It could be low memory.

Check your memory settings. It sounds like your too low. Up your toolpath and datapath settings.

Its in your screen, config, allocations.

Finecut

also try upping your memory settings in mastercam

wire a littlel more. that might also help.

Finecut

Do you hace the macros turned on in the Haas?.

finecut

Got a Haas of Fadal. Its built in.

If not its a not easy task.

Finecut

Look here :

# Formulas - Use ':' instead of '=' to initialize variables

.

.

.

swg18 : 0 # Switch for G18 plane - 0=normal sgcode, 1=call sgcode2 for Boss's G18

You will crash the machine if you dont change this!!!

Test it before and after and notice the g2, g3 output. A little are will turn into a BIG ARC

Finecut

What Level of NC add on in the control?

There are 3 levels

Basic-- which comes with the machine

HNC -- Adds most of the bells

???? -- I fogot the name but this brings it up to a fanuc standard.

G17, 18, 19 are active.

In G18 mode make sure the post reverses the g2 and g3 moves. There is a switch at the top of the post that changes this.

The machine will do x,y,z moves, and the post will switch planes as needed.

You will notice a lot of stoping and starting if the processor in the machine is a 486.

As to just x,y,z moves only. never tried it

And "x" is not out yet...................

Finecut

Anyone doing probing on a fadal. I can get x and y to work but z just stumps me. Iam trying to get the probe to set z work offsets. Iam close but not getting the right caculations to input the corect #'s

probe is a Maraposs

Anybody ?

Finecut

yep,

Finecut

Year of machine?

What did the motor do before going down?

Sounds like a power supply problem, but...

bearing to tight? lack of oil? any unusual sounds?

ck the drive control. If the drive is out of phase to the other drives. 3d work will show this, but not always.

The Haas service should be checking for all of this.

3 motors in a year is nuts!!!!

finecut

check your mouse software to see if it supports a wheel mouse in windows.

finecut

MF.

Thats easy,

The g40 cancels the d offset call, and clears it from the machine memory.

The "D" is always called with a cutter comp call so the machine knows what offset to use. You can use different "D" numbers for the same tool number.

In a Haas you have to set a parameter to do this, but it works there also,

Finecut

Trevor,

Its a 17 in with a nivida go 5600,5200, or 440

video card. Look at the zd7000 series fron hp

SWeeeeeeeeeet and the sound ..........

about $2000 w 512meg ram

Finecut

You guys are lucky. I have to put in G10's on most of our outputs. Fadal, okuma, ect

Just one I wont. Our new Kitumara with all the bells including probing, pallet changer,4th ...

and a 16I control. this one is fun to pgm

Finecut

For the hard core users who dont live in the big city anymore. I've been building mine since 1983

look at : www.jncs.com

Finecut

Scott

I fixed the haas post for comments by opening the mpmaster and a haas post side by side in the cimco editor. Look at the comment lines in both then edit in the comment lines from the mpmaster to the haas post. Then I commented out the old lines in the haas post with a "#"

It worked great

Finecut

Well I just started a new job. Had to move and sell everything I didnt need. Its not easy but the new job is 100 times better then the last one!!

Finally get to use ver 9 with all the updates.

The wcs is a real time saver. Now trying to get used to solids. There has got to be a fast way of drawing with solids. The books Ive seen dont help

Oh and the pay is better, and I can finally do my job without being told to go home after 8 hrs. Its nice to enjoy working again

Finecut

Looks like the scteen on a HURCO !!

PUKE !!

Finecut

I got a job as a manufacturing engineer in WI, about 1 hr north of St Paul.

So much for NAFTA. China never has played by the rules. We are the dumping ground. If you have to ask where all the money goes look what china just put up in space. WE Paid for that. Along with other things. It sure isn't going to the workers.

A lot of people are out of work and/or taking less in the paycheck at a lesser job.

Next election is the time to find the right people to put in office. If thats possible !

Finecut

I was let go a month and a half ago. Major management changes and third new owner. But the good news is I found a new job, far better then before. Iam moving this thursday and start the 24th. Its very rough out there. I sold a lot of stuff to stay afloat and unload the debt.

See you all on the other side.

Finecut

Try this

Draw a line , say 2.0 in long

In toolpath pick countour,chain, partial

pick one end, click wait, pick opposite end, done

pick a tool for the slot size

set the depth

pick ramp, depth amount

offset - almost half the dia in xy (minus amount)

do a 3d view and watch the path

now play with the settings

Finecut

Thanks

Finecut (out of work programmer looking for work)

i saw this on a job site right next to mastercam programming for 5 axis. What is this?

Finecut