thank you

is it possible to change the parallel surface cut direction in mastercam v8? obviously mastercam does not always know best. thanks [email protected]

the motherboard is one of the latest and greatest form asus. yes it has an agp 4x pro slot. the problem with getting a different video card is that since the on board chipset was made by nvidea they did their best to insure that only nvidea agp (geforce) cards will work with this motherboard. yes i have diabled the onboard graphics chip in while trying to use other agp cards and they all performed poorly (none of which were nvidea cards due to the fact that i already had these other cards i stole from my other other pc's to test). before i changed to this new motherboard everything ran fine under windows me so that's not the problem. so rather than invest in any more pc upgrades i think i can survive with a different background color no matter how much it pains me. thanks to all who helped me realize the root of this problem. kuei

jamman is right on the ball. windows me asus a7n266e motherboard with onboard geforce2 chip black cursor on black background. prefer background to be black. what to do? [ 04-22-2002, 11:15 PM: Message edited by: kuei ]

is there a way to change the color of the cursor in mastercam 8?

does anybody know the best training resources for mastercam v8 design and 3d milling?

thanks to gstephens for being right on the money on this problem

whenever i save a program from a fanuc 0m control to a pc using any mastercam dnc software an extra line (blank) is added after each line of code. how can this be avoided?