kuei
-
Posts
8 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by kuei
-
-
is it possible to change the parallel surface cut direction in mastercam v8? obviously mastercam does not always know best.
thanks
-
the motherboard is one of the latest and greatest form asus. yes it has an agp 4x pro slot. the problem with getting a different video card is that since the on board chipset was made by nvidea they did their best to insure that only nvidea agp (geforce) cards will work with this motherboard. yes i have diabled the onboard graphics chip in while trying to use other agp cards and they all performed poorly (none of which were nvidea cards due to the fact that i already had these other cards i stole from my other other pc's to test). before i changed to this new motherboard everything ran fine under windows me so that's not the problem. so rather than invest in any more pc upgrades i think i can survive with a different background color no matter how much it pains me.
thanks to all who helped me realize the root of this problem.
kuei
-
jamman is right on the ball.
windows me
asus a7n266e motherboard with onboard geforce2 chip
black cursor on black background. prefer background to be black.
what to do?
[ 04-22-2002, 11:15 PM: Message edited by: kuei ]
-
is there a way to change the color of the cursor in mastercam 8?
-
does anybody know the best training resources for mastercam v8 design and 3d milling?
-
thanks to gstephens for being right on the money
on this problem
-
whenever i save a program from a fanuc 0m control to a pc using any mastercam dnc software an extra line (blank) is added after each line of code.
how can this be avoided?
parallel cut direction
in Industrial Forum
Posted
thank you