G1CNC
-
Posts
24 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by G1CNC
-
-
Thanks for the help guys.
File too big to upload but you can download here-
https://1drv.ms/u/s!AqiFymYHxox3idNbHrgF5wB1248uHw?e=raaqXv
-
11 minutes ago, gcode said:
It may be having conflict with the tall walls so it stops cutting
As an experiment, try a smaller bull endmill and see if it goes deeper
will try this. thanks
-
thanks man. I'm on the tech exchange now but cant seem to find this. can you post a link?
sorry, found it. thanks.
-
Hi guys
Some help if possible. See attached.
Blade expert is having trouble roughing this impeller and won't go to full depth using a bullnose cutter.
I'm guessing its because the impeller isn't your normal shape and blade expert is getting confused? Note the small vanes in the middle.
Any help would be appreciated.
Thanks.
-
Found it. thanks for your help!
-
Thanks. where to find such things?
-
-
-
Thanks for the help guys. the stock model done the trick!
-
Hi guys
I'm trying to create a Opti rough toolpath using stock that was created in a previous operation.
When calculating this MasterCam is outputting the toolpath as if it was a solid block when clearly its not.
See pics also I will attached zip2go file also here- https://1drv.ms/u/s!AqiFymYHxox3iKYDCCpveYEGQGABVQ?e=kcy7rj
Any help would be appreciated.
Thanks.
-
Thanks for the help guys. It was the lead in/out that was too short.
- 1
-
tried that. No change
-
-
Hi Guys
I'm having trouble opening an older .mcx9 file in 2020. see attached warning. What are the options?
Thanks.
-
yes and yes
-
-
Hi guys.
Please see attached screen shot. Why is this option greyed out? I have never seen this before and we have been using Mcam for years.
This is a brand new installation of 2020 on our computer. Never seen this before.
Is this a graphics issue?
For all the licence police we are fully licenced but have no maintenance...so 'contact dealer' is not an option.
Any help would be appreciated.
Thanks.
-
yes, bot why only 2020? 2018 & 19 both run fine
-
-
Hi Colin
Thanks for your help on this. It's probably a better idea if I try and find out why 2020 is running so slow on my computer. The post is, as you say, 'binned' to the MD.
-
Fully licenced user here who is out of maintenance. I am looking to do the same thing here. Why? 2020 is running slow on my computer. 2019 is not.
I have updated to post as per your instructions above. How do I update the machine file to use on an earlier version?
-
2020 is running like a bag of xxxx on our computer. 2018/19 is running well. Tried everything, re-install etc. RAM/graphics card etc are all up to spec. Software is fully licensed and the post is too. We just don't have any maintenance.
-
Is it possible to use a post processor/machine file on an earlier version of MasterCam? IE, Can I run my 2020 post on MasterCam 2018?
Update Issue
in Industrial Forum
Posted
Hi Guys
Before I 'contact my reseller' has anyone any thoughts on how to fix this when trying to update MasterCam?
See screenshot attached.