Hello everyone,

Trying to burn a hole, the hole is tipped about the X 20° and abouth the Y 12° I am asked at 20° were can we rotate the part about ctr to get the hole in position to burn thru, I am hopeing one or more of you are more math oriented than myself and can tell me why it cannot be done without the 2nd tip, I do not believe it can but the setup guys are not convienced.

Note It is a round part, 30 holes equal spaced on a concentric bolt circle

Thanks Everyone.

Thanks All, great help once again.

Kennebec

Sorry for the Incomplete post, I am using X2MR2 SP1(11.2.4.6) and a modified MPfan Post

Thanks

Kennebec

3 axis Vertical Machine

When programming Rotary Indexing we us A0, A90. and A-90 and A180. presently my post is outputing Absolute(A0 A90 A180 and A270) and keeps counting up past 360°, I want to fix this to output A0, A90. and A-90. and A180, and do not count up past 360°.

Thanks everyone

Thanks Neurosis

Ken

Where did you find the retract on index switch?

Thanks

Ken

Thanks Bryan, I will pre plan and see how it works out.

Are you all succesfully combining Mills and Lathes in 1 MCX file, I have not had a lot of luck with that, I save my files with Job number L or M (Lathe or Mill)

Thanks

Anyone using a NetHasp, I would like to put our Machine def and control files as well as tool files in their respective folders on our server but before I do that and path our config files, has anyone done this or am I asking for trouble, there may be more than 1 person using a machine def and or tool file at any one time, will that be a problem? My obvious goal is for all of us to be working with the SAME files and settings.

Thanks Kennebec

Using Mastercam X2 cutting 1/2-14 od NPT operators are having to cheat their offsets, in the X positive direction more than just a wear type adjustment, below is the posted output.

Note I-.0166 is correct for the Z-.5337 at 1.7833° but were is the adjustment for approach we are at a Z.2204, I posted this with no adjustments, just default settings...

N1G50S2500M8

G0T0000M42

G97S400M3

G0X1.0488Z.2204

G71X.7013Z-.5337B30D.0068U0.I-.0166H.1143F.0714M73

G0X20.Z20.M9

Thanks to you all

Kennebec

Greg

have you looked in your toolpath Planes tab to see that for "but when it post it post A0 and it should be A270, " toolpath your planes are 1)WCS Top 2)Tool Plane A270 and 3)Comp/Construction Plane A270

Kennebec

the way I setup my views

Draw 2 short lines from your origin to the X+ and to the Y+ directions of the desired view, go to Gview and select entity, select your 2 lines X 1st and from the origin end then Y from the origin End chain both in positive direction, note Axis nomes should point to XY and Z Plus if not pick next until they do, now name and save the newly created view

Trying to help...

Hello everyone

McamX2 MR2 trying the Solids-Solid Drilling for the 1st time it looks promising but I am using a WCS that repositioned the solid for machining that flipped it Bottom side up, my new WCS set X and Y zeros to ctr as original but my new Z Zero is the NEW Top (originally was farside) and my spot cycle wants to go to the original Z zero

Thanks

Kennebec

Using the Design Module on a NETHasp, X2MR2

Simple Line/Arc Data on Level 1 (finish Part Customer Supplied Data)

Level 2 In process stock (rgh operation)

Level 3 Dimensions for In process operation

Delete a dimension on level 3 to go back and change level 2 in process material conditions

return to level manager and see that there are 0 (ZER0) entities on ALL layers

Returned to main menu and File, Open, Recent, and returned to original file.

In the past had not noticed the Zero Entities and have lost all DATA and started over, any similar problems or ideas what is going on?

This has only come up since approximately when the windows update issue showed up

I believe I caused my own problem going from lathe to mill I did a save as and added M to my file name for Mill, then added a machine type, Mill and deleted the Lathe Ops and machine type, and somehow failed to save the cleaned up file, I have not had a lot of luck with multiple Machine types in 1 file so I use file name "L" and "M" for lathe and mill.

Thanks

Kennebec

Allset, Rebouted server and all is good

Using NetHasp (not a new setup just a new problem)

I am using /s or /m3 to open solids or mill3

I can open files but as soon as I try to add a Machine Type the following error pops up

"Error checking out mill level 3 License

The NetHasp is not connected to the NetHasp Server"

it sounds like a path problem just not sure what it is, I need the NetHasp to open Mcam at all correct?

G Tech 840 DI control

Our post is outpuitting A270. and we want A-90.

am I just missing a simple switch

thanks everyone

I am having this from time to time it seems like one to two times a day and I am not specifically Transforming operetions but just changing tool path parameters, it seems related to the X2 MR2 vs. Windows update situation discussed in earlier threads

Net Hasp with switches

it looks like your feed is incorrect it should be .05 (G94 IPR)

We are haveing discussions as to the best way to handle parts with multiple operations, some like a new file for each operation, some like multiple tool path groups all in 1 file with layers and colors, we also disagree a bit about the use of WCS vs Moving Geometry, your opinions, Pro and Con are

appreciated.

Thanks Kennebec

Thanks Martin,

As I was typing my response to you I thought maybe I should switch to "Design" then try the Right-Click, and make group active option...

That was the ticket.

Kennebec

Martin,

Yes I did try changing back and in help it describes going from "Design" to an active machine group by Right-Click, and select, make group active, which may work in Design but I do not see the make group active option from the Mill mode I am in.

I have a job with 2 operations 1st is lathe with a stock flip, once complete I added a new Machine Type "Mill" and proceeded thru the milling. the job has run and now I want to revisit the late operation to fix my errors for future reference but I am unable to get the late op active again.

"Warning Feature not available Mill cannot access lathe operation"

Using Nethasp Mastercam X2MR1(11.1.3.12)

SP1(11.1.4.0)

Thanks

We have been reminded that the numbers in the 5114 parameter are metric but still we get no clearance after the 1st peck, I am starting to think we may have a problem with the control...