-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by TROST
-
-
Used to wipe down with ISO and lightly scotch bright if needed (white or light grey scotch bright, very little abrasive) then lightly oil. ACF-50 is awesome for corrosion and rust prevention. A friend who works on airplanes recommended this stuff and it works great.
-
6 hours ago, JB7280 said:
I have this problem frequently, though I use a spacemouse, so I don't often notice it. If I recall correctly, checking or unchecking this box will sometimes fix it.
Thanks ill check that setting if I have this problem again.
-
Restarted computer and seems to be fixed. Still wanted to see if anyone knew what setting I may have changed. Ctrl was not stuck as far as I know bit its working as mentioned when pressing control now. Could have been stuck and popped back up as I did my restart. Thanks for the help!
-
Also I'm using mastercam2018
-
Hello all, some how I have locked my rotation when pressing the scroll wheel to just one axis. Normally this is a dynamic movement that allows me to move the screen/model in any direction. I have included a screen shot of the icon that pops ups as soon as I depress the scroll wheel. Any help would be much appreciated! I'm very new to this program. thanks
Special tooling options (AKA, who besides Harvey Tool)
in Machining, Tools, Cutting & Probing
Posted
Almar Tools
https://almartool.com/