Metalmuncher
-
Posts
110 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Metalmuncher
-
-
Change the start point on your chain.
-
I would like to hear your opinion. I agree about the pilot Pro, I use it but only about half the functions
-
I pick a point and put in the major diameter, usually very close.
-
Hey Simon
-
Its the only way to go with blind holes
-
2)Super Mini Mill 2 with 5th axis
3) Mini mills with 4th axis
1)VF-2 with 5th axis
-
Go to WCS, veiw manager, right click on the veiw and delete. You cannot delete if it is used in a toolpath
-
We use Pro/E and the solid is PRT
-
I would use the 5axis swarf
-
You got mail
-
Send it to me. I will see what I can do.
-
+1 on Lyndex
-
Try using surfinish radial with the radial point the center of the hole. It works pretty good.
-
We use Pro-E all the time, save the file as a .PRT and they come in fine as long as you have solids
-
Installing now
-
Not if you got one
-
Why not just use the native Pro E files? PRT
-
-
If I understand right, I did something similar using 5-axis multi-surface and output in 3-axis. This might work for you.
-
Same thing happens here
-
I have used Curve 5axis with great results.
-
You can renumber in the controller
-
Make sure you always put in a positive number
-
Sometimes you just have to use a smaller tool
Metric to Inch
in Industrial Forum
Posted
System configuration/ change to english