Metalmuncher
-
Posts
110 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Metalmuncher
-
-
Merry Christmas
-
Welcome to the forum
-
I got 4 boxes and 4 mouse pads for the 4 seats that we have here. My reseller does a great job supporting us.
That,s what happened here also
-
Are you sure that is BACP? Could it be BACB?
We do a lot of Boeing here and I cannot find that BACP anywhere.
-
Set your retract above the part.
-
-
I got mine last Friday
-
Very smooth and painless here
-
I second that one Tony
-
I am working on a large file with many surfaces. Is there a way to set all normals the same without selecting each surface serperately. Like doing a mass modify? Thanks
-
Nice website. You may want think about the higher rpm spindle and the programable coolant options
-
Yes it can but you have to enable your filters.
-
We have had great luck using Hanita Varamills they hold up very well.Just remember that you are not going to go anywhere fast.
-
I run duel Dell LCD's with no problems
-
A tease??
-
Welcome
-
Welcome
-
Jeff
It does not matter what way floppy, flash or rs232 programs will not load unless I load them into another machine first then save then then I can load them into the machine. I will not be in the office on Monday but my attention will be back on this matter on Tuesday, I will be training for 5 axis on Monday
-
They took out the error messages in ours also You are correct in the 80 per line. Our other Haas's will take the programs with no problem. I have to load into a Mini-Mill and save it back to disk and then load it into the VF-6 something seems wrong with that Haas is banging it's head to try and figure this out. First they said it was MC X then maybe Windows XP. It seems to me to be a software issue on Haas's side. Not my desktop
-
error code # 244 more than 80 per line and code 197 misc software error.This is a brand new machine with 20 gig hard drive and 16 meg memory
-
Is anyone else having problems with their Haas coldfire controller like erroring out on loading programs into it. I am using MCX and cannot seem to get the controller to take even a simple program.
-
Yes they are still around here is Charles e-mail
-
Code breaker is San Diego to far?
-
Thanks
zoom in
in Industrial Forum
Posted
Works fine here