Mark,

When I try to snap to circle center point it uses the circle diameter for toolpath which is uneditable.If I snap to points it allows me to edit on circmill or helix bore parameters page but is applied to all points selected.

I would assume it is uneditable if you pick circle center point because you can pick different diameter circles for the same toolpath.

no problems here

ps

you can actually create something in a spread sheet and save it as *.csv and it will fill in your levels when you retrieve it as long as second column has a name,letter,or number and first column is level number 1 to 2 billion

to get numbered levels you can right click level manager and save a level set that you have numbered and named, and then retrieve it when you open a new file.

If that is any help

It seems like they kept some of the hotkeys maybe even alot after a click or two.The ones I miss are pick points (endpoint,center,inter,etc)This slows me down and remapping keys maybe an answer but not as user friendly as the old key assignments that had meaning.

In solids layout am I missing something? it exits without the warning it used to give you.

associativity between solid and layout would be even cooler.

I used updatepost.dll for hurco post and had some problems with if statements,so I think.Adding brackets to the existing if statement fixed it.

quote:

--------------------------------------------------------------------------------

Has anyone in the New England seen a copy of X yet?

I see many other regions but nothing in CNC's backyard?

--------------------------------------------------------------------------------

John

got mine tuesday from Macdac

I am in West Swanzey NH

got my codes

now to find the time to play

+1 curve/slice

great feature

Just got mine today.

can't wait for the codes.

Gilberto,

Thank you I will check it out.I went to the site the other day it was acting weird.

Richard

Gilberto I have seen you mention automold in other

posts.Automold run in Mcam as a chook?

Thanks Rich

I sent it to you hope you enjoy

We just got Mastercam mill 3 with solids and moldplus.I am using it for our design work and I am liking it.I used Cadkey7 in the beginning and

we got Ironcad about a year ago.I like Mastercam much better than Ironcad.I think I will always respect Cadkey for what it could do and the fact it was our first cad program.I would still use Cadkey7 for some stuff if I could get it to run on XP.Cadl programs were cool.

Thanks Mike

Nice job