DFredregill
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by DFredregill
-
Waterline tool path not detecting surfaces.
DFredregill replied to DFredregill's topic in Industrial Forum
Thank You for the info. -
Waterline tool path not detecting surfaces.
DFredregill replied to DFredregill's topic in Industrial Forum
Thanks, that was it. Much appreciated. -
Running a small part using a optirough and then a waterline tool path. The machining surfaces can be selected during setup however the tool path floats off the part .050 making the part .100 oversize. Unfortunately I cannot support any files. I do not have a containment selected. I have attempted to make one and adjust offsets with no luck.
-
Attempting to toolpath a part for a roughing. However any tool I use in the 3D plane will set the toolpath .100 above the selected surfaces. I'm trying area rough and hybrid both are acting the same in the regards to an elevated tool path. I've looked at my bounding box and offsets.
