Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Yes I am fully aware i put in it in all caps. It is that amazing what I am been able to do the last couple days with this toolpath. I did a swarf area with this toolpath and got no retracts. We are using a 5/8 Ballendmill 8" OAL with a 6" Stick out with .75 LOC cutting at 7000 rpms and 75 ipm 5.5" deep. We cut 8 pockets .79 wide x 5" deep on a 20.54 Dia on the top side to a 14.30 diameter on the insdie with a 40 deg tilt in less than 4 hours that is roughing and finshing. We had one rapid move into the part and one rapid out of the part index and go to town. Other side has some undercutting with a Lolipop cutter. Made my surfaces, then my chains and then my 4 control line and done. No needing to lie to Mastercam and do not do this or do not do that or blah blah blah blah to cut the part. I cut it and done. I will repeat that encase you did not understand what I was saying. I CUT IT AND DONE!!!!!
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.