Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I am doing some balance turning. I thought I was going along pretty good until now. I can get the machine to rough with Sync Codes no problem. When I get to the next tool call on the lower it alarms out with 2463 Change Timing G140/G141/G142 B Side 4. The PDF says Constant Peripheral Speed Control. I was getting an alarm if the Lower had a G97 so I commented that out and got rid of that alarm, but now I am getting this alarm and the G140 is being called in the tool change.
VBNCT=1
G140
VBNCT=0
RTMCR
I even put a G140 after my wait code to see if I could alarm it before the tool change and I can. I have tried M05 in a Wait Code sync and still getting the alarm. I am thinking I am going around the approved process to balance cut operations and why I am getting the error. I have attached the code if someone wants to take a look at it. Thanks in advance for any suggestions or help.
Sorry I had to remove the file.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.