Search the Community
Showing results for tags 'G71'.
Found 1 result
-
Hello everybody... I am new to this forum, and i am from Denmark. (so sorry in advance for the spelling/grammatic errors ) I am currently employed as a cnc-operator where i have been working on 6 cnc lathes all with siemens c200 iso programming software. But now my boss bought me an Okuma LC10 with OSP 5000 software and i am programmin this for the first time. I have some issues programming the thread cycle for this, and was hoping there was somebody out there that could help med with this. I need to make a standard 1/2" BSP thread. starting in Z-5.5 X20.955 and ending in Z-17.3 X20.955 Here is my program so far, if you are running Okuma, you would probably think this looks wrong, i dont really know, i have only programmed for Siemens before. T0808 (NC Drill) M03 S750 G0 X0 Z2 G1 G95 F.1 Z-2 G0 Z50 X500 Z800 T0101 (8.9 mm Drill) G0 Z2 X0 G1 G95 F.08 Z-18.25 G0 Z50 X500 Z800 T0505 (6 mm Drill) G0 Z2 X0 G0 Z-16.5 G1 G95 F.08 Z-26 G0 Z50 X500 Z800 T0404 (Internal turning) M03 S2500 G0 X13 Z2 G1 G95 F.1 Z0 X8.97 B0.7 Z-16 F.03 Z-18 F.06 X5.95 B0.8 Z-18.8 G0 Z50 X500 Z800 T0606 (roughing and finishing outside) G0 X26.5 Z2 G1 G95 F.2 Z-5.5 F.12 Z-26.3 X30 G0 Z5.5 X21.25 G1 G95 F.12 Z-20.3 X30 G0 Z2 X7 G1 G95 F.08 Z0 X12.8 B0.85 Z-3 X13.1 Z-6 X20.9 B2 Z-20.5 X26 B0.6 Z-26.5 X30.25 B1.5 Z-28 X35 G0 Z50 X500 Z800 T0707 (finishing clearance) G0 Z-17.3 X22 G1 G95 F.03 X17.5 X20.8 Z-20.5 X27 F.06 G0 X50 Z50 X500 Z800 T0202 (Thread cycle) G0 Z-4 X20.955 ""Here is where the threadcycle should be"" My normal threadcycle is L97 and goes like this - R20=1,8142 R21=20,955 R22=-5.5 R23=0 R24=-0.9071 R25=0 R26=0 R27=0 R28=-15 R29=0 R31=20.955 R32=-17.3 L97 But i dont know if the okuma can read this, it seems to me that it dont. I hope you can help me.
