Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
OK this is the first issue I've had with X8 and it's driving me crazy!
Create a multiaxis curve toolpath to cut a slot in a part.
Set all parameters as I want them to be (Tool, Speed / Feed, Coolant, Depth Cuts, Entry / Exit, etc...).
Regen and backplot the operation, and all is as it should be.
The same feature appears on the part in 3 other locations, so I copy and paste the original operation, then select the new geometry at the 2nd, 3rd, & 4th slot locations.
Regen and backplot the 3 new operations, but now the tool stays down between passes in the 3 copied operations as if the 'Keep Tool Down' box is checked, but it is not checked in the original toolpath parameters or the copied parameters.
(I didn't change anything on the parameters page, just copied and pasted the operation as is and selected the new geometry.)
I've used this same procedure many, many times but this is the first time I've seen the tool retract between passes as it should on the original toolpath, but stay down on the copied ones.
I'm sure my chains are all good, and all going in the same direction from the same start point.
Has anyone else had this happen or know how to correct it?
Thanks in advance.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.