Search the Community
Showing results for tags 'eia/iso'.
Found 2 results
-
Hello all, i have been having some issues trying to get subprograms to work with a Mazak Integrex 200-IV, the 5-axis version with tail stock and no lower turret. We are using the dialogue for most of the part, but some roughing has been programmed with GibbsCAM. The issues arise when we try to add the subs to the main program, as in order to have priority on them (have them run in a different order of what they are in the main program), we need to program it in the "manual program" block. We have tried simply writing M98P10488 and it manages to start running the program, but as it gets to the line with M53.5 it gets an alarm, "807 Invalid format". When using the normal subprogram block it runs just fine, but that dosent have priority, and therefore requires us to stop the program midway, run the EIA, then continue where we left off. Neither the M98 nor G65 make any difference, nor having the manual program direct to a subprogram block like this: M198P53152Q95 That is Mazatrol subprogram, program number 53152, block 96. I imagine it needs some other G or M code, but i am clueless. usually the manual program blocks dont require any starting block, meaning writing G0X0Z10 simply runs it without any hiccup.
-
I have a mazak quick turn 20n lathe with a mazatrol cam t2 control. i am not extremely familiar with mazaks and am trying to figure out how to do converstaional programming at the machine, however it seeems the machine is set to read in g code only. it says EIA/ISO on the screen and i am wondering if anyone knows how to get the control set back up to do conversational programming. ideally i would want to program offline and import g code programs in, but we do not have the software.
