Search the Community
Showing results for tags 'need help'.
Found 3 results
-
Hi every one hope you are all well its been a long time since I posted here but I need some help so thanks in advance. I am trying to reconstruct a solid from the supplied 2d drawing I can get it very close but it is not correct. Basically it is a mudguard laser cut from 3mm plywood it has slots cut in it to allow it to be wrapped around the corners. I am only working on 1/2 the guard as the other 3 parts will just be mirrored. The problem is with the side that has the curve on when I cut the solid with the 2d profile the faces are not at right angles to each other like they would be if laser cut. I have tried for days and I cannot find a solution. I am attaching a cut down version 2017 mcam file. Cheer's Mud Guard.mcam
-
I just starting using 2017. It was easy to rotate and setup a part in X7 I just dont get how to rotate and setup the 3D part in 2017 . I press right WCS tpo rotate part flat and it spins 90 I want it flat
-
ok this is my first time trying to machine with solids and not wireframe where am i going wrong been tryin lots of things but dont really have a clue how to make it work with a solid also its saying error i am not permitted to upload this kind of file when i try to upload the x6hle file of this part
