Search the Community
Showing results for tags 'osp 7000'.
Found 2 results
-
trying to get a retract between C rotations. Currently tool is staying at the K level. I messed with putting a DA=.5, but it made no diff. ( NO. 47 DRILL ) N102 MT=4303. M321 N103G21HP=1 M403 SB=3.82*70/.08 G52 TL=4343 BA=90. M404 /MT=4901 M110 G21 HP=4 G138 Y0. M146 G00 C90. M147 M13 G127 B90. G17 G00 X-1.148 Y.61 G00 Z3.6127M8 G00G95 Z.6127M175 G183 X-1.148 Z-.31 C90. K.1 D.03 L.03 DA.5 M08 F.0007 C210. C330. G180 G00 X-.6127 Z3.6127 G00 X-1.148 G126 G136 X300 G21 HP=1 M12 M146 M109 M9 M174 M02
-
total okuma noob here. have a number of questions regarding this machine that i'm just starting to mess with. why start on a 2 axis when you can jump right into a Mill-turn? 1. can programming and operation manuals be had from okuma (or anywhere) on decade+ old machine? i have nothing. i've tried to get some info from okuma, but no luck so far. 2. trying to figure out how to index the turret as in the video below. control has a few programs for indexing but an air hissing sound is all i get when trying to execute. on prog: N0 V7= -31 N1 T300 BA=V7 G04 F3 V7=V7+1 ... .
