How well do those spade drills work without through coolant? Since we do not have it might have to go half way from each side?

I need to bore a 6" hole through a 8"x9" block of HRS 14.25" deep. My thoughts are to rough it with a 2" feed mill half way from each side and then bore it to size. The problem I see is getting chips outs. We only have a vertical mill without through spindle coolant/air. I would like to drill about a 2.5" hole through the center for the chips to fall out but I am not seeing a lot available for that diameter and length. Unless I drill it half way from each side. It would just add an extra flip to the part. I need to do 8 parts. any other suggestions? or suggestions on a drill? Thanks

That was it.. thanks

Thats what I thought... But I do not see it.

Where do I find the multi threading manager in 2021? For some reason I cannot find it to even add it to the ribbon bar. Thanks

I Did use the help topic before posting here. What I didnt realize is when I created a silhouette boundary to simplify the geometry I got some arcs and some splines which is why it was not working for me. When I just used the original data I got it to work. Thanks

How does the chain similar work? I cannot seem to get it to work for me. So I am assuming I am doing something in the wrong order. Do you pick the chain first and then the chain similar button? Thanks

Ill have to look into this some more and see if we have any of the options you mentioned. I would guess that we do not. thanks

With our machine we touch off tools like normal without the 90 DEG head on. then when we put the head on those offset lengths are transfered to the head. the post compensates for the additional length the head adds. I only have problems when face milling in 2 directions where it needs to apply the offset to 2 axis at the same time. thanks

I have a Ameraseiki bridgemill with a 90 deg head and fanuc control. When I machine the 90 degrees faces its fine. But when I go to mill a 45 deg face meaning that I'm cutting in X and Y at the same time I'm having trouble. First my post was not outputting the G44/G43 and the H command when doing the 45 degree faces. So I got my post updated but now the machine is alarming out when It sees more than 1 axis with the tool length compensation. If I run it without the tool length comp and adjust the depth for my tool length it cuts fine. and if I edit it so it only compensates 1 axis its not in the right position. i hope this makes sense. any ideas???? T1 M06(6" FACE MILL) M200 C225. M01 G17 G00 G59 G90 G44 H1 X-19.434 Y-13.4214 ( it gives alarm----- tool comp command more than 2 axis) Z2.475 M08 X-11.8327 Y-5.82 G01 X-11.5922 Y-5.5795 F30. X-5.3444 Y-11.8274 F65. X-5.5212 Y-12.0042 F50. G00 X-13.1862 Y-19.6692 M09 G91 G00 G28 Z0. M30 thanks

Why did you choose them for your needs?

MSC is just the first one to come out and give their pitch. IF we go to a tool management system We would look into others as well and find the best fit for us. I just do not know anything about it so thats why I was asking for info. Nothing is going to happen overnight.

Our company is looking into the idea of tool vending machines. MSC is going to come out and give a sales pitch. I know a couple other venders I deal with offer the same thing. We are a small company that does not do production work. Every thing is Custom 1-2 piece . Currently I keep a few Vidmars stocked with tooling that is ordered by our purchaser from a handful of venders depending our she can get the best price. What are some pros and cons of this system??? Thanks

what is batch processing? I have seen the icon but never new what it was for. I read the mastercam help menu but I still do not understand it.

Can anyone explain to why a Mitsubishi Insert is $88 and a Dapra Is $30? If they last 3 times as long I would understand but I find that hard to believe. And to the guys that are running any of these what are you using for a holder? We currently just use an endmill holder for our indexable tooling. I see Dapra recommends Shrink fit or a milling chuck.