mpmaster x7 more issues

[fillingdave]

I think there is an issue in how mpmaster x7 is looking at starting a toolpath at the beginning of a program using advanced toolpaths. it should rapid to the work plane not feed down to part or use a wild feed value

example 3:

O01

(OP3)

G01 G17 G20 G40 G80 G90

G91 G28 Z0.

(COMPENSATION TYPE - COMPUTER)

T90 M06 (1/2 FLAT ENDMILL D/E)

(TOOLPATH - HORIZONTAL.......)

G01 G17 G90 G59 G94 B184. X-.3988 Y-.0772 S2250 M03 F3213.37

G43 H90 Z.225

Z.125 F19.

Y.4244 Z.1136 F15.

Y.261

Y.2033

[gcode]

Have you checked the Feed page in the Control definition to be sure Convert rapid to max federate is not checked

[gcode]

_{Something is wrong somewhere}

_{This is what I'm getting from a stock right out of the box X7mpmaster}

 

_{T56 M06 (1.25 X .187R X 4.25 INGERSOLL BUTTON CUTTER)}

_{(MAX - Z23.965)}

_{(MIN - Z1.0779)}

_{(TOOLPATH - ROUGH REST PASSES)}

_{(STOCK LEFT ON WALLS = .1)}

_{(STOCK LEFT ON FLOORS = .1)}

_{G00 G17 G90 G54 X-8.6089 Y-9.5979 S1850 M03}

_G49

_G94

_{G05.1 Q1}

_{G43 H56 Z23.965}

_Z4.075

_{G01 Z3.965 F80.}

_{X-8.6091 Y-9.5965 Z3.9504}

_{X-8.6095 Y-9.5923 Z3.9363}

_{X-8.6101 Y-9.5854 Z3.9234}

_{X-8.6109 Y-9.5761 Z3.912}

_{X-8.6119 Y-9.5648 Z3.9027}

_{X-8.6129 Y-9.5519 Z3.8957}

_{X-8.6141 Y-9.5378 Z3.8915}

_{X-8.6152 Y-9.5232 Z3.89}

_{G02 X-8.5214 Y-8.8771 I1.5293 J.1078 F120.}

[fillingdave]

THIS IS WHAT IM GETTING ON ANOTHER TOOLPATH..... (HORIZONTAL MACHINE DEF)

O01

(MPMASTER GENERIC 3/4-AXIS HORIZONTAL)

(T14 - 1/2 FLAT ENDMILL ROUGH - H14 - D14 - D0.5000")

G01 G17 G20 G40 G80 G90

G91 G28 Z0.

T14 M06 (1/2 FLAT ENDMILL ROUGH)

(MAX - Z.1002)

(MIN - Z-.5297)

(TOOLPATH - M.FINISH.........)

(STOCK LEFT ON WALLS = .01)

(STOCK LEFT ON FLOORS = .01)

G01 G17 G90 G55 G94 X-1.5865 Y-2.6752 S2300 M03 F20.

G43 H14 Z.1002

Z-.5197 F125.

X-1.6987 Y-2.3952 Z-.5288 F50.

X-1.7115 Y-2.3799 Z-.5297

[gcode]

This is the same toolpath from my previous post.

I went to the Feed page of the Control Definition and turned on

"Convert rapid to max federate"

 

now I'm getting the same thing you're getting

 

T56 M06 (1.25 X .187R X 4.25 INGERSOLL BUTTON CUTTER)

(MAX - Z23.965)

(MIN - Z1.0779)

(TOOLPATH - ROUGH REST PASSES)

(STOCK LEFT ON WALLS = .1)

(STOCK LEFT ON FLOORS = .1)

G01 G17 G90 G54 G94 X-8.6089 Y-9.5979 S1850 M03 F500.

G49

G05.1 Q1

G43 H56 Z23.965

Z4.075

Z3.965 F80.

X-8.6091 Y-9.5965 Z3.9504

X-8.6095 Y-9.5923 Z3.9363

X-8.6101 Y-9.5854 Z3.9234

X-8.6109 Y-9.5761 Z3.912

X-8.6119 Y-9.5648 Z3.9027

X-8.6129 Y-9.5519 Z3.8957

X-8.6141 Y-9.5378 Z3.8915

X-8.6152 Y-9.5232 Z3.89

G02 X-8.5214 Y-8.8771 I1.5293 J.1078 F120.

 

if you have checked the feed page and its turned off,

try reloading your machine

[fillingdave]

I tried that...didn't help any... is there a way to force it in the post to make this issue go away?

[gcode]

I don't know...

why don't you try updating your X6 post and see if you have the same problem

[fillingdave]

ya that's where I originally got confused... the first post (mpmaster x6) I brought over was from x6 and it worked beautifully... not a single mistake. thought maybe that was the issue so I downloaded mpmaster x7 and its doing this with the feedrates at the start on both... odd... thanks for your help though