Relocating my B & C moves

[So not a Guru]

I want to change where my machines B & C-axes move aat the start & toolchange operations.

This is what I’m getting

G0 G17 G40 G80 G90 G94 G98

( 1/2" BULLMILL   )

( TOOL# - T22 -  DIA. - .5 )

( PART OFF 1ST OP )

N240 T22 T1 M06

G53 G0 G90 Z0.

S4000 M3

G54

G65 P9544 H1 (CALCULATE G54.4 DYNAMIC OFFSET)

G54.1 P300 (CENTER OF ROTATION WPC)

G54.4 P1

G0 X4.3612 Y4.3

G43 H#3020 Z.87

G0 G90 B90. C270.

Z.87 M8

 

This is what I want

G0 G17 G40 G80 G90 G94 G98

( 1/2" BULLMILL   )

( TOOL# - T22 -  DIA. - .5 )

( PART OFF 1ST OP )

N240 T22 T1 M06

G53 G0 G90 Z0.

S4000 M3

G54

G65 P9544 H1 (CALCULATE G54.4 DYNAMIC OFFSET)

G54.1 P300 (CENTER OF ROTATION WPC)

G54.4 P1

G0 G90 B90. C270.

G0 X4.3612 Y4.3

G43 H#3020 Z.87

Z.87 M8

 

What should I be looking for in the post to modify?

 

Zeke

[Ben Wood]

In the generic 5 axis router post I think you should be looking for these

 

p_out  Outputs A axis

s_out  Outputs B axis