-
NOTICE: Please download the Mastercam 2021 Home Learning Edition software here: https://www.inhousesolutions.com/mastercam-2021-hle-download/
The Mastercam 2022 Home Learning Edition Software can be requested here: https://signup.mastercam.com/demo-hle-mms
Mplmaster (all versions)
Master G-Code Post for Lathe
14 files
-
Mplmaster - Master G-Code Post - Version 2022
Please note that mpmaster and mplmaster are only being updated to the latest version of Mastercam going forward. All development is now done to our IKE post product line. If you are interested in obtaining an IKE post please contact your local Mastercam reseller.
eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click the download button above to download Mplmaster for 2022. It's our master configurable lathe post.
You may also read instructions for:
Installing a post
Email feedback to our Post Department
271 downloads
0 comments
Updated
-
Mplmaster - Master G-Code Post - Version 2021
Please note that mpmaster and mplmaster are only being updated to the latest version of Mastercam going forward. All development is now done to our IKE post product line. If you are interested in obtaining an IKE post please contact your local Mastercam reseller.
eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click the download button above to download Mplmaster for 2021. It's our master configurable lathe post.
You may also read instructions for:
Installing a post
Email feedback to our Post Department
316 downloads
0 comments
Updated
-
Mplmaster - Master G-Code Post - Version 2020
Mplmaster is based on CNC Software's master lathe post - Mplfan - but offers additional features.
eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click the download button above to download Mplmaster for 2020. It's our master configurable lathe post.
You may also read instructions for:
Installing a post Email feedback to our Post Department.
539 downloads
0 comments
Updated
-
Mplmaster - Master G-Code Post - Version 2019
Mplmaster is based on CNC Software's master lathe post - Mplfan - but offers additional features.
eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click the download button above to download Mplmaster for 2019. It's our master configurable lathe post.
You may also read instructions for:
Installing a post Email feedback to our Post Department.
514 downloads
0 comments
Updated
-
Mplmaster - Master G-Code Post - Version 2018
Mplmaster is based on CNC Software's master lathe post - Mplfan - but offers additional features.
eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click the download button above to download Mplmaster for 2018. It's our master configurable lathe post.
You may also read instructions for:
Installing a post Email feedback to our Post Department.
648 downloads
0 comments
Updated
-
Mplmaster - Master G-Code Post - Version 2017
Mplmaster is based on CNC Software's master lathe post - Mplfan - but offers additional features.
eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click the download button above to download Mplmaster for 2017. It's our master configurable lathe post.
You may also read instructions for:
Installing a post Email feedback to our Post Department.
Special Features
2017 specific parameter updates to maintain previous functionality X coolant support X comment support Compatible with machine def changes for machine configurations Y-axis C-axis and required output type [*]File header tool table
[*]Sets work offset style in post, not in Misc Values
[*]G12.1, G07.1 output format
[*]G12.1 paths don't need to start at C0, approach with X and C then z
[*]Cross mill from top or front plane
[*]Part transfer with spindle synch
[*]Spindle synch roughed in
[*]Indexing mode setup
[*]Lathe and Mill drill cycles setup, longhand output for drill and peck (No G81/G82)
[*]Enhanced tapping
[*]Type 1 and Type 2 G71 roughing support
[*]Feed G code at toolchange
[*]End Constant Surface Speed paths with RPM output
[*]Mill/Drill feed in Unit/Rev support
[*]Canned threading options
thdang = rad2deg$ * thdangle$ #lead-in angle thdang = rad2deg$ * thda1$ #half of the thread angle thdang = rad2deg$ * thda2$ #thread angle (full included angle) [*]Forced R output for arcs in G07.1
[*]Clamp and Brake code output with overrides
[*]G28/G30 home select
[*]Addressed - cross cutting operation with rotary axis turned on, post output matches backplot
[*]Addressed - full arc moves on face with rotary axis turned on
622 downloads
0 comments
Updated
-
Mplmaster - Master G-Code Post - Version X9
Mplmaster is based on CNC Software's master lathe post - Mplfan - but offers additional features.
eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click the download button above to download Mplmaster for X9. It's our master configurable lathe post.
You may also download instructions for:
Installing a post Updating a previous version to X7/8 Email feedback to our Post Department.
Special Features
X9 specific parameter updates to maintain previous functionality X coolant support X comment support Compatible with machine def changes for machine configurations Y-axis C-axis and required output type [*]File header tool table
[*]Sets work offset style in post, not in Misc Values
[*]G12.1, G07.1 output format
[*]G12.1 paths don't need to start at C0, approach with X and C then z
[*]Cross mill from top or front plane
[*]Part transfer with spindle synch
[*]Spindle synch roughed in
[*]Indexing mode setup
[*]Lathe and Mill drill cycles setup, longhand output for drill and peck (No G81/G82)
[*]Enhanced tapping
[*]Type 1 and Type 2 G71 roughing support
[*]Feed G code at toolchange
[*]End Constant Surface Speed paths with RPM output
[*]Mill/Drill feed in Unit/Rev support
[*]Canned threading options
thdang = rad2deg$ * thdangle$ #lead-in angle thdang = rad2deg$ * thda1$ #half of the thread angle thdang = rad2deg$ * thda2$ #thread angle (full included angle) [*]Forced R output for arcs in G07.1
[*]Clamp and Brake code output with overrides
[*]G28/G30 home select
[*]Addressed - cross cutting operation with rotary axis turned on, post output matches backplot
[*]Addressed - full arc moves on face with rotary axis turned on
1,071 downloads
0 comments
Updated
-
Mplmaster - Master G-Code Post - Version X8
Mplmaster is based on CNC Software's master lathe post - Mplfan - but offers additional features.
eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click the download button above to download Mplmaster for X8. It's our master configurable lathe post.
You may also download instructions for:
Installing a post Updating a previous version to X7/8 Email feedback to our Post Department.
Special Features
X8 specific parameter updates to maintain previous functionality X coolant support X comment support Compatible with machine def changes for machine configurations Y-axis C-axis and required output type [*]File header tool table
[*]Sets work offset style in post, not in Misc Values
[*]G12.1, G07.1 output format
[*]G12.1 paths don't need to start at C0, approach with X and C then z
[*]Cross mill from top or front plane
[*]Part transfer with spindle synch
[*]Spindle synch roughed in
[*]Indexing mode setup
[*]Lathe and Mill drill cycles setup, longhand output for drill and peck (No G81/G82)
[*]Enhanced tapping
[*]Type 1 and Type 2 G71 roughing support
[*]Feed G code at toolchange
[*]End Constant Surface Speed paths with RPM output
[*]Mill/Drill feed in Unit/Rev support
[*]Canned threading options
thdang = rad2deg$ * thdangle$ #lead-in angle thdang = rad2deg$ * thda1$ #half of the thread angle thdang = rad2deg$ * thda2$ #thread angle (full included angle) [*]Forced R output for arcs in G07.1
[*]Clamp and Brake code output with overrides
[*]G28/G30 home select
[*]Addressed - cross cutting operation with rotary axis turned on, post output matches backplot
[*]Addressed - full arc moves on face with rotary axis turned on
710 downloads
0 comments
Updated
-
Mplmaster - Master G-Code Post - Version X7
By Webby
Mplmaster is based on CNC Software's master lathe post - Mplfan - but offers additional features.
eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click the download button above to download Mplmaster for X7. It's our master configurable lathe post.
You may also download instructions for:
Installing a post Updating a previous version to X7 Email feedback to our Post Department.
Special Features
X7 specific parameter updates to maintain previous functionality X coolant support X comment support Compatible with machine def changes for machine configurations Y-axis C-axis and required output type [*]File header tool table
[*]Sets work offset style in post, not in Misc Values
[*]G12.1, G07.1 output format
[*]G12.1 paths don't need to start at C0, approach with X and C then z
[*]Cross mill from top or front plane
[*]Part transfer with spindle synch
[*]Spindle synch roughed in
[*]Indexing mode setup
[*]Lathe and Mill drill cycles setup, longhand output for drill and peck (No G81/G82)
[*]Enhanced tapping
[*]Type 1 and Type 2 G71 roughing support
[*]Feed G code at toolchange
[*]End Constant Surface Speed paths with RPM output
[*]Mill/Drill feed in Unit/Rev support
[*]Canned threading options
thdang = rad2deg$ * thdangle$ #lead-in angle thdang = rad2deg$ * thda1$ #half of the thread angle thdang = rad2deg$ * thda2$ #thread angle (full included angle) [*]Forced R output for arcs in G07.1
[*]Clamp and Brake code output with overrides
[*]G28/G30 home select
[*]Addressed - cross cutting operation with rotary axis turned on, post output matches backplot
[*]Addressed - full arc moves on face with rotary axis turned on
1,430 downloads
Updated
-
Mplmaster - Master G-Code Post - Version X6
By Webby
Based on CNC Software's master lathe post - Mplfan - this post has additional features. eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click the download button above to download Mplmaster for X6. It's our master configurable lathe post. The download also contains 2 sample part transfers and related notes.
Email feedback to our Post Department.
Special Features
X6 specific parameter updates to maintain previous functionality
X coolant support
X comment support
Compatible with machine def changes for machine configurations
Y-axis
C-axis and required output type
[*]File header tool table
[*]Sets work offset style in post, not in Misc Values
[*]G12.1, G07.1 output format
[*]G12.1 paths don't need to start at C0, approach with X and C then z
[*]Cross mill from top or front plane
[*]Part transfer with spindle synch
[*]Spindle synch roughed in
[*]Indexing mode setup
[*]Lathe and Mill drill cycles setup, longhand output for drill and peck (No G81/G82)
[*]Enhanced tapping
[*]Type 1 and Type 2 G71 roughing support
[*]Feed G code at toolchange
[*]End Constant Surface Speed paths with RPM output
[*]Mill/Drill feed in Unit/Rev support
[*]Canned threading options
thdang = rad2deg$ * thdangle$ #lead-in angle
thdang = rad2deg$ * thda1$ #half of the thread angle
thdang = rad2deg$ * thda2$ #thread angle (full included angle)
[*]Forced R output for arcs in G07.1
[*]Clamp and Brake code output with overrides
[*]G28/G30 home select
[*]Addressed - cross cutting operation with rotary axis turned on, post output matches backplot
[*]Addressed - full arc moves on face with rotary axis turned on
2,838 downloads
0 comments
Updated
-
Mplmaster - Master G-Code Post - Version X5
By Webby
Based on CNC Software's master lathe post - Mplfan - this post has additional features. eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click the download button above to download Mplmaster for X5. It's our master configurable lathe post. The download also contains 2 sample part transfers and related notes.
Email feedback to our Post Department.
Updated June 2010
Special Features
X5 specific parameter updates to maintain previous functionality
X coolant support
X comment support
Compatible with machine def changes for machine configurations
Y-axis
C-axis and required output type
[*]File header tool table
[*]Sets work offset style in post, not in Misc Values
[*]G12.1, G07.1 output format
[*]G12.1 paths don't need to start at C0, approach with X and C then z
[*]Cross mill from top or front plane
[*]Part transfer with spindle synch
[*]Spindle synch roughed in
[*]Indexing mode setup
[*]Lathe and Mill drill cycles setup, longhand output for drill and peck (No G81/G82)
[*]Enhanced tapping
[*]Type 1 and Type 2 G71 roughing support
[*]Feed G code at toolchange
[*]End Constant Surface Speed paths with RPM output
[*]Mill/Drill feed in Unit/Rev support
[*]Canned threading options
thdang = rad2deg$ * thdangle$ #lead-in angle
thdang = rad2deg$ * thda1$ #half of the thread angle
thdang = rad2deg$ * thda2$ #thread angle (full included angle)
[*]Forced R output for arcs in G07.1
[*]Clamp and Brake code output with overrides
[*]G28/G30 home select
[*]Addressed - cross cutting operation with rotary axis turned on, post output matches backplot
[*]Addressed - full arc moves on face with rotary axis turned on
3,186 downloads
0 comments
Updated
-
Mplmaster - Master G-Code Post - Version X4
By Webby
Based on CNC Software's master lathe post - Mplfan - this post has additional features. eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click "download file" below to download Mplmaster for X4. It's our master configurable lathe post. The download also contains 2 sample part transfers and related notes.
Email feedback to our Post Department.
Updated June 9, 2009
Special Features
X4 specific parameter updates to maintain previous functionality
X coolant support
X comment support
Compatible with machine def changes for machine configurations
Y-axis
C-axis and required output type
[*]File header tool table
[*]Sets work offset style in post, not in Misc Values
[*]G12.1, G07.1 output format
[*]G12.1 paths don't need to start at C0, approach with X and C then z
[*]Cross mill from top or front plane
[*]Part transfer with spindle synch
[*]Spindle synch roughed in
[*]Indexing mode setup
[*]Lathe and Mill drill cycles setup, longhand output for drill and peck (No G81/G82)
[*]Enhanced tapping
[*]Type 1 and Type 2 G71 roughing support
[*]Feed G code at toolchange
[*]End Constant Surface Speed paths with RPM output
[*]Mill/Drill feed in Unit/Rev support
[*]Canned threading options
thdang = rad2deg$ * thdangle$ #lead-in angle
thdang = rad2deg$ * thda1$ #half of the thread angle
thdang = rad2deg$ * thda2$ #thread angle (full included angle)
[*]Forced R output for arcs in G07.1
[*]Clamp and Brake code output with overrides
[*]G28/G30 home select
[*]Addressed - cross cutting operation with rotary axis turned on, post output matches backplot
[*]Addressed - full arc moves on face with rotary axis turned on
1,200 downloads
0 comments
Updated
-
Mplmaster - Master G-Code Post - Version X3
By Webby
Based on CNC Software's master lathe post - Mplfan - this post has additional features. eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click "download file" below to download Mplmaster for X3. It's our master configurable lathe post. The download also contains 2 sample part transfers and related notes.
Email feedback to our Post Department.
Updated August 11, 2008
Special Features
X coolant support
X comment support
Compatible with machine def changes for machine configurations
Y-axis
C-axis and required output type
[*]File header tool table
[*]Sets work offset style in post, not in Misc Values
[*]G12.1, G07.1 output format
[*]G12.1 paths don't need to start at C0, approach with X and C then z
[*]Cross mill from top or front plane
[*]Part transfer with spindle synch
[*]Spindle synch roughed in
[*]Indexing mode setup
[*]Lathe and Mill drill cycles setup, longhand output for drill and peck (No G81/G82)
[*]Enhanced tapping
[*]Type 1 and Type 2 G71 roughing support
[*]Feed G code at toolchange
[*]End Constant Surface Speed paths with RPM output
[*]Mill/Drill feed in Unit/Rev support
[*]Canned threading options
thdang = rad2deg$ * thdangle$ #lead-in angle
thdang = rad2deg$ * thda1$ #half of the thread angle
thdang = rad2deg$ * thda2$ #thread angle (full included angle)
[*]Forced R output for arcs in G07.1
[*]Clamp and Brake code output with overrides
[*]G28/G30 home select
[*]Addressed - cross cutting operation with rotary axis turned on, post output matches backplot
[*]Addressed - full arc moves on face with rotary axis turned on
442 downloads
0 comments
Updated
-
Mplmaster - Master G-Code Post - Version X2
By Webby
Based on CNC Software's master lathe post - Mplfan - this post has additional features. eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click "download file" below to download Mplmaster for X2. It's our master configurable lathe post. The download also contains 2 sample part transfers and related notes.
Email feedback to our Post Department.
Updated April 22, 2008
Special Features
X coolant support X comment support Compatible with machine def changes for machine configurations Y-axis C-axis and required output type [*]File header tool table [*]Sets work offset style in post, not in Misc Values[*]G12.1, G07.1 output format[*]G12.1 paths don't need to start at C0, approach with X and C then z[*]Cross mill from top or front plane[*]Part transfer with spindle synch[*]Spindle synch roughed in[*]Indexing mode setup[*]Lathe and Mill drill cycles setup, longhand output for drill and peck (No G81/G82)[*]Enhanced tapping [*]Type 1 and Type 2 G71 roughing support[*]Feed G code at toolchange[*]End Constant Surface Speed paths with RPM output[*]Mill/Drill feed in Unit/Rev support[*]Canned threading options
thdang = rad2deg$ * thdangle{:content:}nbsp; #lead-in angle thdang = rad2deg$ * thda1{:content:}nbsp; #half of the thread angle thdang = rad2deg$ * thda2{:content:}nbsp; #thread angle (full included angle) [*]Forced R output for arcs in G07.1 [*]Clamp and Brake code output with overrides [*]G28/G30 home select[*]Addressed - cross cutting operation with rotary axis turned on, post output matches backplot[*]Addressed - full arc moves on face with rotary axis turned on
474 downloads
0 comments
Updated