blade expert 4axis.... Help

[jsvery]

I was trying to rough a helical gear to machine in a 4 axis vmc.

i have no problem with finishing using morph between two curves or flow or parallel.

i tried to rough with multi axis rough but it seems to be a 5 axis strategy [not supported with 4 axis machine]

i tried to rough with blade expert  like in the picture ,and when i try to run streaming simulation i got 'current tool path is not for 4 axis machine'.

which strategy should i use to rough this part .

 

I want to make a 4axis toolpath with a blade expert

q.mcx-9

[crazy^millman]

Multi Axis rough would be a good choice just need to make your geometry to trick it in to output 4 axis. Josh just did an example for the part with flutes with Axis sub that would work also. I will try to look at it tomorrow when I am working. 

[jsvery]

Thank you I want to know how! Please help~:)