Fanuc + Input parameter

[MIL-TFP-41]

We recently got a new-to-us Matsurra MAM72-25V operational. Now that the machine is running smooth, the operators mentioned one thing. On every 30i controller we already have, (at least on the Matsurra's) when you type a value in your offset and hit the +INPUT button it prompts you the new value and asks if its OK, then you hit EXEC and it writes the new value.

On this machine it just writes the value.

In the interest of keep all the machines configured the same....Is there a parameter to turn this prompt on?

 

[Leon82]

On the offset page hit the right arrow  key until you see the word guard as a soft key.

when you go in there you're going to see a couple settings for confirmation of delete program plus input confirmation recheck that or uncheck it depend on what you want.

 

Go into the old offset setting side not the new IHMI side.  This should work on all fanuc controls of that number

[MIL-TFP-41]

15 hours ago, Leon82 said:

On the offset page hit the right arrow  key until you see the word guard as a soft key.

when you go in there you're going to see a couple settings for confirmation of delete program plus input confirmation recheck that or uncheck it depend on what you want.

 

Go into the old offset setting side not the new IHMI side.  This should work on all fanuc controls of that number

Thats the ticket, Thanks!