haas 5th axis

[BGM 91]

hi im trying to swarf machine an outer profile of a part on a trunnion and i cannot get a good finish on part. the machine is trying to lock and unlock the a,b axis randomly and it dwells and leaves tool marks. there is no m10 or m12 in program. Is there a setting in the control that controls this? machine is a haas vm-6 with a tr210

thanks  

[JParis]

Set an unlock commannd before the path...

Haas has a thing for trying to autolock it...set you M command after the G43 line and you should be good

 

HTH

[BGM 91]

thanks that made it much better