SAME PROGRAM NAMES NOT POSTING AS A GROUP

[Mickey@acceltool]

When I program my lathes and I have c-axis mill/drilling ops in the same setup as I post it wants to post the lathe ops as 1 program and then post the c-axis ops as "THE EXACT SAME NAME"  as the lathe ops... Why is the post seeing the operations as different programs yet they are the same name and should post out as 1 single program.. Recently updated to 2022 and at the newest update!

Thanks

[crazy^millman]

Right click the operations and click the change filename. Yes seems odd they are the same name and does this,but I have seen a space or something get added and it does this. I will change them to something completely different then go back and name them what I originally wanted and then go from there.

[meatychips]

Also make sure the nc number is the same for all

[Mickey@acceltool]

It's not all the time! It's bugging me and it's gonna get me one of these days!! I can't put my finger on what is causing it to do it! wondered if anyone else had had the problem as well.