Grouping managers to an undocked, tabbed window.

[Camino]

I usually work with Toolpaths, Solids, Planes and Levels managers grouped together on a tabbed window, undocked from the graphics screen and on another monitor.  Somehow though, the levels manager has gotten split off in a separate window and I can't remember how to get it back as a tab with the others. I can see how to switch managers from docked to floating, but not how to group them on a single window.   This is in MC 2021.   Any help is much appreciated.

[JParis]

drag one of them to the main window, redock it, then drag the others to it and redock them all...you can then break them out again....

After you have them back as you like, shut down mcam and restart it.

That will keep it and set it

[Camino]

Thanks for the rapid response.

It turns out that dragging individual managers to the graphics window and docking to the CENTER position groups them on a tabbed document.  I had been dragging to the LEFT SIDE position, which just stacked one next to the other, keeping them separated.  All good now.

 Thanks again.