problem with lathe tutorial

[aaron tabor]

I am doing a lathe tutorial and I am having a problem with 2 toolpaths.  Toolpath #10 is roughing the part and instead of cutting to the edge of the stocks boundary its cutting into the part where it shouldn't, I changed the leadout to what seems like the right angle but its still cutting into the part.  I am also having an issue with the finish toolpath that follows it says that the tool is starting embedded in the stock so I increased the length of the line past the end of the stock, it didn't fix it I also extended the lead in but that also isn't working.  I included a download link for the part I am referring to.

https://www.dropbox.com/s/eida0kxl19slhnx/Tutorial%206%20review%20with%20toolpaths%20%232.emcam?dl=0