Modify Tool Change

[spiros1]

Hi everyone,

I'm starting to use mastercam and I having a trouble with my machine, when I post the nc file the tool change format is:

ex:

T1(1"Face Mill);

M06;

the problem if I reset and search for tool 1 again the machine will change to whatever next tool in the carousel instead of re run T1. if I remove EOB symbol the machine will keep T1 running with tool change.

ex:

T1(1" Face Mill) M06;

So my question is what should I change in my post processor in order to delete the EOB to  keep T and M code on the same line instead of 2 lines.

Thank you so much

[mc_post]

Hi  spiros1

     For Reference Only !

 

 

sblank  :   ""

1,  

      if strtool$ <> sblank, strtool$ = ucase(strtool$)

      t$, no_spc$, "(", *strtool$,")",e$

       "M06", e$

2,

      if strtool$ <> sblank, strtool$ = ucase(strtool$)

      t$, no_spc$, "(", *strtool$,")", "M06", e$

       

[spiros1]

Hi mc_post,

It worked, thank you so much for your help :)

[Leon82]

In the controller definition disable staged tool routines