Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Coolant Type Change on Null Tool Change

CatchingChrome
 Share

Recommended Posts

CatchingChrome Rookie

CatchingChrome

Posted
Posted

I use air blast on a drill/mill for chamfers and flood coolant for engraving. When moving from chamfers to engraving without forcing a tool change, I can get the flood coolant to turn on appropriately but I can't get the air blast to turn off before flood turns on. If I select air off/before and flood on/with, the coolant codes repeat after null tool change event. 

Both Generic 3 Axis.pst and MpMaster.pst give me the similar results.

Has anyone written logic for the pcant_out postblock to handle this?

Thanks 

MpMaster

%
O0000 
(MCX FILE  - 
(PROGRAM   - 
(DATE      - FEB-09-2023)
(TIME      - 6:51 AM)
(T27  - 3/8 DRILL/MILL       - H27  - D27  - D0.3750")
G00 G17 G20 G40 G80 G90
G91 G28 Z0.
(COMPENSATION TYPE - COMPUTER)
T27 M06 (3/8 DRILL/MILL)
(MAX - Z2.)
(MIN - Z-.065)
On
G00 G17 G90 G54 X-24.504 Y-.625 S4584 M03
G43 H27 Z2.
Z.1
G94 G01 Z-.065 F25.
G03 X-24.444 Y-.685 R.06 F91.68
X-24.384 Y-.625 R.06
X-24.636 Y-.373 R.252
X-24.888 Y-.625 R.252
X-24.636 Y-.877 R.252
X-24.384 Y-.625 R.252
X-24.3842 Y-.615 R.252
X-24.4442 Y-.5574 R.06
X-24.5042 Y-.6174 R.06
X-24.5041 Y-.6198 R.06
G00 Z2.
X-20.0248 Y-.625
Z.1
G01 Z-.065 F25.
G03 X-19.9648 Y-.685 R.06 F91.68
X-19.9048 Y-.625 R.06
X-20.1568 Y-.373 R.252
X-20.4088 Y-.625 R.252
X-20.1568 Y-.877 R.252
X-19.9048 Y-.625 R.252
X-19.905 Y-.615 R.252
X-19.965 Y-.5574 R.06
X-20.025 Y-.6174 R.06
X-20.0249 Y-.6198 R.06
G00 Z2.
X-15.5456 Y-.625
Z.1
G01 Z-.065 F25.
G03 X-15.4856 Y-.685 R.06 F91.68
X-15.4256 Y-.625 R.06
X-15.6776 Y-.373 R.252
X-15.9296 Y-.625 R.252
X-15.6776 Y-.877 R.252
X-15.4256 Y-.625 R.252
X-15.4258 Y-.615 R.252
X-15.4858 Y-.5574 R.06
X-15.5458 Y-.6174 R.06
X-15.5457 Y-.6198 R.06
G00 Z2.
X-11.0664 Y-.625
Z.1
G01 Z-.065 F25.
G03 X-11.0064 Y-.685 R.06 F91.68
X-10.9464 Y-.625 R.06
X-11.1984 Y-.373 R.252
X-11.4504 Y-.625 R.252
X-11.1984 Y-.877 R.252
X-10.9464 Y-.625 R.252
X-10.9466 Y-.615 R.252
X-11.0066 Y-.5574 R.06
X-11.0666 Y-.6174 R.06
X-11.0665 Y-.6198 R.06
G00 Z2.
X-6.5872 Y-.625
Z.1
G01 Z-.065 F25.
G03 X-6.5272 Y-.685 R.06 F91.68
X-6.4672 Y-.625 R.06
X-6.7192 Y-.373 R.252
X-6.9712 Y-.625 R.252
X-6.7192 Y-.877 R.252
X-6.4672 Y-.625 R.252
X-6.4674 Y-.615 R.252
X-6.5274 Y-.5574 R.06
X-6.5874 Y-.6174 R.06
X-6.5873 Y-.6198 R.06
G00 Z2.
X-2.108 Y-.625
Z.1
G01 Z-.065 F25.
G03 X-2.048 Y-.685 R.06 F91.68
X-1.988 Y-.625 R.06
X-2.24 Y-.373 R.252
X-2.492 Y-.625 R.252
X-2.24 Y-.877 R.252
X-1.988 Y-.625 R.252
X-1.9882 Y-.615 R.252
X-2.0482 Y-.5574 R.06
X-2.1082 Y-.6174 R.06
X-2.1081 Y-.6198 R.06
G00 Z2.
Off <--------------------- correct
S7000 M03
On <--------------------- correct
X-4.1591 Y-.6311
Z.02
G01 Z-.005 F15.
X-4.1161 F22.
Y-.6666
X-4.1361 Y-.6798
X-4.1389 Y-.6809
X-4.163 Y-.6863
X-4.1652
X-4.1864 Y-.6823
X-4.188 Y-.6817
X-4.2055 Y-.6695
X-4.2065 Y-.6685
X-4.2188 Y-.6495
X-4.219 Y-.649
X-4.2236 Y-.6277
Y-.6253
X-4.2206 Y-.6052
X-4.2189 Y-.6007
X-4.2069 Y-.5826
X-4.2058 Y-.5815
X-4.1887 Y-.5695
X-4.1866 Y-.5685
X-4.1662 Y-.5637
X-4.1635
X-4.1509 Y-.5655
X-4.1387 Y-.5707
X-4.1282 Y-.5787
X-4.1202 Y-.5897
G00 Z.1
X-4.2699 Y-.5648
Off <-------------------repeat
Z.02
G01 Z-.005 F15.
X-4.3489 F22.
Y-.6852
X-4.2699
G00 Z.1
X-4.2745 Y-.6224
Off <-----------------repeat
Z.02
G01 Z-.005 F15.
X-4.3489 F22.
G00 Z.1
X-4.3963 Y-.6253
Off <---------------repeat
Z.02
G01 Z-.005 F15.
X-4.3998 Y-.6028 F22.
X-4.4101 Y-.5838
X-4.4259 Y-.5704
X-4.4355 Y-.5664
X-4.4462 Y-.5648
X-4.4903
Y-.6852
X-4.4462
X-4.4297 Y-.6817
X-4.4259 Y-.68
X-4.4101 Y-.6666
X-4.3998 Y-.6475
X-4.3963 Y-.6253
G00 Z.1
X-4.6516 Y-.6852
Off <-----------------repeat
Z.02
G01 Z-.005 F15.
X-4.7231 F22.
X-4.7146 Y-.667
X-4.7134 Y-.6653
X-4.698 Y-.651
X-4.6793 Y-.6374
X-4.6648 Y-.6221
X-4.6551 Y-.6068
X-4.6516 Y-.5932
X-4.6544 Y-.5814
X-4.6619 Y-.5722
X-4.6729 Y-.566
X-4.6861 Y-.5637
X-4.6974 Y-.5653
X-4.7077 Y-.5703
X-4.7158 Y-.578
X-4.7202 Y-.5881
G00 Z.1
X-4.7741 Y-.5648
Off <----------------repeat
Z.02
G01 Z-.005 F15.
X-4.8259 F22.
X-4.8365 Y-.6253
X-4.8237 Y-.6156
X-4.8076 Y-.6126
X-4.7935 Y-.6153
X-4.7817 Y-.623
X-4.7736 Y-.6347
X-4.7704 Y-.6492
X-4.7737 Y-.6641
X-4.7822 Y-.6757
X-4.794 Y-.6836
X-4.808 Y-.6863
X-4.8192 Y-.6847
X-4.8294 Y-.68
X-4.8375 Y-.6727
X-4.8431 Y-.6631
G00 Z2.
Off <----------------duplicates
Off
On
On <--------------duplicates
M05
G91 G28 Z0.
G28 Y0.
G90
M30
%

                             Generic 3 axis
                             
%
O0000
(CHECK PROGRAM NUMBER AND REVISION)
 
( 02-09-23 )
( 07:32 )
 
( T27 | 3/8 DRILL/MILL | H27 )
 
 
( T27 | 3/8 DRILL/MILL | H27 )
G20
G0 G17 G40 G49 G80 G90
T27 M6
G0 G90 G54 X-24.504 Y-.625 S4584 M3
G43 H27 Z2. M83
Z.1
G1 Z-.065 F25.
G3 X-24.444 Y-.685 R.06 F91.7
X-24.384 Y-.625 R.06
X-24.636 Y-.373 R.252
X-24.888 Y-.625 R.252
X-24.636 Y-.877 R.252
X-24.384 Y-.625 R.252
X-24.3842 Y-.615 R.252
X-24.4442 Y-.5574 R.06
X-24.5042 Y-.6174 R.06
X-24.5041 Y-.6198 R.06
G0 Z2.
X-20.0248 Y-.625
Z.1
G1 Z-.065 F25.
G3 X-19.9648 Y-.685 R.06 F91.7
X-19.9048 Y-.625 R.06
X-20.1568 Y-.373 R.252
X-20.4088 Y-.625 R.252
X-20.1568 Y-.877 R.252
X-19.9048 Y-.625 R.252
X-19.905 Y-.615 R.252
X-19.965 Y-.5574 R.06
X-20.025 Y-.6174 R.06
X-20.0249 Y-.6198 R.06
G0 Z2.
X-15.5456 Y-.625
Z.1
G1 Z-.065 F25.
G3 X-15.4856 Y-.685 R.06 F91.7
X-15.4256 Y-.625 R.06
X-15.6776 Y-.373 R.252
X-15.9296 Y-.625 R.252
X-15.6776 Y-.877 R.252
X-15.4256 Y-.625 R.252
X-15.4258 Y-.615 R.252
X-15.4858 Y-.5574 R.06
X-15.5458 Y-.6174 R.06
X-15.5457 Y-.6198 R.06
G0 Z2.
X-11.0664 Y-.625
Z.1
G1 Z-.065 F25.
G3 X-11.0064 Y-.685 R.06 F91.7
X-10.9464 Y-.625 R.06
X-11.1984 Y-.373 R.252
X-11.4504 Y-.625 R.252
X-11.1984 Y-.877 R.252
X-10.9464 Y-.625 R.252
X-10.9466 Y-.615 R.252
X-11.0066 Y-.5574 R.06
X-11.0666 Y-.6174 R.06
X-11.0665 Y-.6198 R.06
G0 Z2.
X-6.5872 Y-.625
Z.1
G1 Z-.065 F25.
G3 X-6.5272 Y-.685 R.06 F91.7
X-6.4672 Y-.625 R.06
X-6.7192 Y-.373 R.252
X-6.9712 Y-.625 R.252
X-6.7192 Y-.877 R.252
X-6.4672 Y-.625 R.252
X-6.4674 Y-.615 R.252
X-6.5274 Y-.5574 R.06
X-6.5874 Y-.6174 R.06
X-6.5873 Y-.6198 R.06
G0 Z2.
X-2.108 Y-.625
Z.1
G1 Z-.065 F25.
G3 X-2.048 Y-.685 R.06 F91.7
X-1.988 Y-.625 R.06
X-2.24 Y-.373 R.252
X-2.492 Y-.625 R.252
X-2.24 Y-.877 R.252
X-1.988 Y-.625 R.252
X-1.9882 Y-.615 R.252
X-2.0482 Y-.5574 R.06
X-2.1082 Y-.6174 R.06
X-2.1081 Y-.6198 R.06
G0 Z2.
M84 <--------------correct
S7000 M3
X-4.1591 Y-.6311
M8 <---------------correct
Z.02
G1 Z-.005 F15.
X-4.1161 F22.
Y-.6666
X-4.1361 Y-.6798
X-4.1389 Y-.6809
X-4.163 Y-.6863
X-4.1652
X-4.1864 Y-.6823
X-4.188 Y-.6817
X-4.2055 Y-.6695
X-4.2065 Y-.6685
X-4.2188 Y-.6495
X-4.219 Y-.649
X-4.2236 Y-.6277
Y-.6253
X-4.2206 Y-.6052
X-4.2189 Y-.6007
X-4.2069 Y-.5826
X-4.2058 Y-.5815
X-4.1887 Y-.5695
X-4.1866 Y-.5685
X-4.1662 Y-.5637
X-4.1635
X-4.1509 Y-.5655
X-4.1387 Y-.5707
X-4.1282 Y-.5787
X-4.1202 Y-.5897
G0 Z.1
X-4.2699 Y-.5648
M84 <------------------repeat
Z.02
M8 <------------------repeat
G1 Z-.005 F15.
X-4.3489 F22.
Y-.6852
X-4.2699
G0 Z.1
X-4.2745 Y-.6224
Z.02
G1 Z-.005 F15.
X-4.3489 F22.
G0 Z.1
X-4.3963 Y-.6253
Z.02
G1 Z-.005 F15.
X-4.3998 Y-.6028 F22.
X-4.4101 Y-.5838
X-4.4259 Y-.5704
X-4.4355 Y-.5664
X-4.4462 Y-.5648
X-4.4903
Y-.6852
X-4.4462
X-4.4297 Y-.6817
X-4.4259 Y-.68
X-4.4101 Y-.6666
X-4.3998 Y-.6475
X-4.3963 Y-.6253
G0 Z.1
X-4.6516 Y-.6852
Z.02
G1 Z-.005 F15.
X-4.7231 F22.
X-4.7146 Y-.667
X-4.7134 Y-.6653
X-4.698 Y-.651
X-4.6793 Y-.6374
X-4.6648 Y-.6221
X-4.6551 Y-.6068
X-4.6516 Y-.5932
X-4.6544 Y-.5814
X-4.6619 Y-.5722
X-4.6729 Y-.566
X-4.6861 Y-.5637
X-4.6974 Y-.5653
X-4.7077 Y-.5703
X-4.7158 Y-.578
X-4.7202 Y-.5881
G0 Z.1
X-4.7741 Y-.5648
M84 <------------------repeat
Z.02
M8 <------------------repeat
G1 Z-.005 F15.
X-4.8259 F22.
X-4.8365 Y-.6253
X-4.8237 Y-.6156
X-4.8076 Y-.6126
X-4.7935 Y-.6153
X-4.7817 Y-.623
X-4.7736 Y-.6347
X-4.7704 Y-.6492
X-4.7737 Y-.6641
X-4.7822 Y-.6757
X-4.794 Y-.6836
X-4.808 Y-.6863
X-4.8192 Y-.6847
X-4.8294 Y-.68
X-4.8375 Y-.6727
X-4.8431 Y-.6631
G0 Z2.
M5 <-----------missing
G91 G28 Z0.
G90 G53  X-32. Y0.
M30
Link to comment
Share on other sites
crazy^millman Veteran

crazy^millman

Posted
Posted
2 hours ago, CatchingChrome said:

I use air blast on a drill/mill for chamfers and flood coolant for engraving. When moving from chamfers to engraving without forcing a tool change, I can get the flood coolant to turn on appropriately but I can't get the air blast to turn off before flood turns on. If I select air off/before and flood on/with, the coolant codes repeat after null tool change event. 

Both Generic 3 Axis.pst and MpMaster.pst give me the similar results.

Has anyone written logic for the pcant_out postblock to handle this?

Thanks 

MpMaster

%
O0000 
(MCX FILE  - 
(PROGRAM   - 
(DATE      - FEB-09-2023)
(TIME      - 6:51 AM)
(T27  - 3/8 DRILL/MILL       - H27  - D27  - D0.3750")
G00 G17 G20 G40 G80 G90
G91 G28 Z0.
(COMPENSATION TYPE - COMPUTER)
T27 M06 (3/8 DRILL/MILL)
(MAX - Z2.)
(MIN - Z-.065)
On
G00 G17 G90 G54 X-24.504 Y-.625 S4584 M03
G43 H27 Z2.
Z.1
G94 G01 Z-.065 F25.
G03 X-24.444 Y-.685 R.06 F91.68
X-24.384 Y-.625 R.06
X-24.636 Y-.373 R.252
X-24.888 Y-.625 R.252
X-24.636 Y-.877 R.252
X-24.384 Y-.625 R.252
X-24.3842 Y-.615 R.252
X-24.4442 Y-.5574 R.06
X-24.5042 Y-.6174 R.06
X-24.5041 Y-.6198 R.06
G00 Z2.
X-20.0248 Y-.625
Z.1
G01 Z-.065 F25.
G03 X-19.9648 Y-.685 R.06 F91.68
X-19.9048 Y-.625 R.06
X-20.1568 Y-.373 R.252
X-20.4088 Y-.625 R.252
X-20.1568 Y-.877 R.252
X-19.9048 Y-.625 R.252
X-19.905 Y-.615 R.252
X-19.965 Y-.5574 R.06
X-20.025 Y-.6174 R.06
X-20.0249 Y-.6198 R.06
G00 Z2.
X-15.5456 Y-.625
Z.1
G01 Z-.065 F25.
G03 X-15.4856 Y-.685 R.06 F91.68
X-15.4256 Y-.625 R.06
X-15.6776 Y-.373 R.252
X-15.9296 Y-.625 R.252
X-15.6776 Y-.877 R.252
X-15.4256 Y-.625 R.252
X-15.4258 Y-.615 R.252
X-15.4858 Y-.5574 R.06
X-15.5458 Y-.6174 R.06
X-15.5457 Y-.6198 R.06
G00 Z2.
X-11.0664 Y-.625
Z.1
G01 Z-.065 F25.
G03 X-11.0064 Y-.685 R.06 F91.68
X-10.9464 Y-.625 R.06
X-11.1984 Y-.373 R.252
X-11.4504 Y-.625 R.252
X-11.1984 Y-.877 R.252
X-10.9464 Y-.625 R.252
X-10.9466 Y-.615 R.252
X-11.0066 Y-.5574 R.06
X-11.0666 Y-.6174 R.06
X-11.0665 Y-.6198 R.06
G00 Z2.
X-6.5872 Y-.625
Z.1
G01 Z-.065 F25.
G03 X-6.5272 Y-.685 R.06 F91.68
X-6.4672 Y-.625 R.06
X-6.7192 Y-.373 R.252
X-6.9712 Y-.625 R.252
X-6.7192 Y-.877 R.252
X-6.4672 Y-.625 R.252
X-6.4674 Y-.615 R.252
X-6.5274 Y-.5574 R.06
X-6.5874 Y-.6174 R.06
X-6.5873 Y-.6198 R.06
G00 Z2.
X-2.108 Y-.625
Z.1
G01 Z-.065 F25.
G03 X-2.048 Y-.685 R.06 F91.68
X-1.988 Y-.625 R.06
X-2.24 Y-.373 R.252
X-2.492 Y-.625 R.252
X-2.24 Y-.877 R.252
X-1.988 Y-.625 R.252
X-1.9882 Y-.615 R.252
X-2.0482 Y-.5574 R.06
X-2.1082 Y-.6174 R.06
X-2.1081 Y-.6198 R.06
G00 Z2.
Off <--------------------- correct
S7000 M03
On <--------------------- correct
X-4.1591 Y-.6311
Z.02
G01 Z-.005 F15.
X-4.1161 F22.
Y-.6666
X-4.1361 Y-.6798
X-4.1389 Y-.6809
X-4.163 Y-.6863
X-4.1652
X-4.1864 Y-.6823
X-4.188 Y-.6817
X-4.2055 Y-.6695
X-4.2065 Y-.6685
X-4.2188 Y-.6495
X-4.219 Y-.649
X-4.2236 Y-.6277
Y-.6253
X-4.2206 Y-.6052
X-4.2189 Y-.6007
X-4.2069 Y-.5826
X-4.2058 Y-.5815
X-4.1887 Y-.5695
X-4.1866 Y-.5685
X-4.1662 Y-.5637
X-4.1635
X-4.1509 Y-.5655
X-4.1387 Y-.5707
X-4.1282 Y-.5787
X-4.1202 Y-.5897
G00 Z.1
X-4.2699 Y-.5648
Off <-------------------repeat
Z.02
G01 Z-.005 F15.
X-4.3489 F22.
Y-.6852
X-4.2699
G00 Z.1
X-4.2745 Y-.6224
Off <-----------------repeat
Z.02
G01 Z-.005 F15.
X-4.3489 F22.
G00 Z.1
X-4.3963 Y-.6253
Off <---------------repeat
Z.02
G01 Z-.005 F15.
X-4.3998 Y-.6028 F22.
X-4.4101 Y-.5838
X-4.4259 Y-.5704
X-4.4355 Y-.5664
X-4.4462 Y-.5648
X-4.4903
Y-.6852
X-4.4462
X-4.4297 Y-.6817
X-4.4259 Y-.68
X-4.4101 Y-.6666
X-4.3998 Y-.6475
X-4.3963 Y-.6253
G00 Z.1
X-4.6516 Y-.6852
Off <-----------------repeat
Z.02
G01 Z-.005 F15.
X-4.7231 F22.
X-4.7146 Y-.667
X-4.7134 Y-.6653
X-4.698 Y-.651
X-4.6793 Y-.6374
X-4.6648 Y-.6221
X-4.6551 Y-.6068
X-4.6516 Y-.5932
X-4.6544 Y-.5814
X-4.6619 Y-.5722
X-4.6729 Y-.566
X-4.6861 Y-.5637
X-4.6974 Y-.5653
X-4.7077 Y-.5703
X-4.7158 Y-.578
X-4.7202 Y-.5881
G00 Z.1
X-4.7741 Y-.5648
Off <----------------repeat
Z.02
G01 Z-.005 F15.
X-4.8259 F22.
X-4.8365 Y-.6253
X-4.8237 Y-.6156
X-4.8076 Y-.6126
X-4.7935 Y-.6153
X-4.7817 Y-.623
X-4.7736 Y-.6347
X-4.7704 Y-.6492
X-4.7737 Y-.6641
X-4.7822 Y-.6757
X-4.794 Y-.6836
X-4.808 Y-.6863
X-4.8192 Y-.6847
X-4.8294 Y-.68
X-4.8375 Y-.6727
X-4.8431 Y-.6631
G00 Z2.
Off <----------------duplicates
Off
On
On <--------------duplicates
M05
G91 G28 Z0.
G28 Y0.
G90
M30
%

                             Generic 3 axis
                             
%
O0000
(CHECK PROGRAM NUMBER AND REVISION)
 
( 02-09-23 )
( 07:32 )
 
( T27 | 3/8 DRILL/MILL | H27 )
 
 
( T27 | 3/8 DRILL/MILL | H27 )
G20
G0 G17 G40 G49 G80 G90
T27 M6
G0 G90 G54 X-24.504 Y-.625 S4584 M3
G43 H27 Z2. M83
Z.1
G1 Z-.065 F25.
G3 X-24.444 Y-.685 R.06 F91.7
X-24.384 Y-.625 R.06
X-24.636 Y-.373 R.252
X-24.888 Y-.625 R.252
X-24.636 Y-.877 R.252
X-24.384 Y-.625 R.252
X-24.3842 Y-.615 R.252
X-24.4442 Y-.5574 R.06
X-24.5042 Y-.6174 R.06
X-24.5041 Y-.6198 R.06
G0 Z2.
X-20.0248 Y-.625
Z.1
G1 Z-.065 F25.
G3 X-19.9648 Y-.685 R.06 F91.7
X-19.9048 Y-.625 R.06
X-20.1568 Y-.373 R.252
X-20.4088 Y-.625 R.252
X-20.1568 Y-.877 R.252
X-19.9048 Y-.625 R.252
X-19.905 Y-.615 R.252
X-19.965 Y-.5574 R.06
X-20.025 Y-.6174 R.06
X-20.0249 Y-.6198 R.06
G0 Z2.
X-15.5456 Y-.625
Z.1
G1 Z-.065 F25.
G3 X-15.4856 Y-.685 R.06 F91.7
X-15.4256 Y-.625 R.06
X-15.6776 Y-.373 R.252
X-15.9296 Y-.625 R.252
X-15.6776 Y-.877 R.252
X-15.4256 Y-.625 R.252
X-15.4258 Y-.615 R.252
X-15.4858 Y-.5574 R.06
X-15.5458 Y-.6174 R.06
X-15.5457 Y-.6198 R.06
G0 Z2.
X-11.0664 Y-.625
Z.1
G1 Z-.065 F25.
G3 X-11.0064 Y-.685 R.06 F91.7
X-10.9464 Y-.625 R.06
X-11.1984 Y-.373 R.252
X-11.4504 Y-.625 R.252
X-11.1984 Y-.877 R.252
X-10.9464 Y-.625 R.252
X-10.9466 Y-.615 R.252
X-11.0066 Y-.5574 R.06
X-11.0666 Y-.6174 R.06
X-11.0665 Y-.6198 R.06
G0 Z2.
X-6.5872 Y-.625
Z.1
G1 Z-.065 F25.
G3 X-6.5272 Y-.685 R.06 F91.7
X-6.4672 Y-.625 R.06
X-6.7192 Y-.373 R.252
X-6.9712 Y-.625 R.252
X-6.7192 Y-.877 R.252
X-6.4672 Y-.625 R.252
X-6.4674 Y-.615 R.252
X-6.5274 Y-.5574 R.06
X-6.5874 Y-.6174 R.06
X-6.5873 Y-.6198 R.06
G0 Z2.
X-2.108 Y-.625
Z.1
G1 Z-.065 F25.
G3 X-2.048 Y-.685 R.06 F91.7
X-1.988 Y-.625 R.06
X-2.24 Y-.373 R.252
X-2.492 Y-.625 R.252
X-2.24 Y-.877 R.252
X-1.988 Y-.625 R.252
X-1.9882 Y-.615 R.252
X-2.0482 Y-.5574 R.06
X-2.1082 Y-.6174 R.06
X-2.1081 Y-.6198 R.06
G0 Z2.
M84 <--------------correct
S7000 M3
X-4.1591 Y-.6311
M8 <---------------correct
Z.02
G1 Z-.005 F15.
X-4.1161 F22.
Y-.6666
X-4.1361 Y-.6798
X-4.1389 Y-.6809
X-4.163 Y-.6863
X-4.1652
X-4.1864 Y-.6823
X-4.188 Y-.6817
X-4.2055 Y-.6695
X-4.2065 Y-.6685
X-4.2188 Y-.6495
X-4.219 Y-.649
X-4.2236 Y-.6277
Y-.6253
X-4.2206 Y-.6052
X-4.2189 Y-.6007
X-4.2069 Y-.5826
X-4.2058 Y-.5815
X-4.1887 Y-.5695
X-4.1866 Y-.5685
X-4.1662 Y-.5637
X-4.1635
X-4.1509 Y-.5655
X-4.1387 Y-.5707
X-4.1282 Y-.5787
X-4.1202 Y-.5897
G0 Z.1
X-4.2699 Y-.5648
M84 <------------------repeat
Z.02
M8 <------------------repeat
G1 Z-.005 F15.
X-4.3489 F22.
Y-.6852
X-4.2699
G0 Z.1
X-4.2745 Y-.6224
Z.02
G1 Z-.005 F15.
X-4.3489 F22.
G0 Z.1
X-4.3963 Y-.6253
Z.02
G1 Z-.005 F15.
X-4.3998 Y-.6028 F22.
X-4.4101 Y-.5838
X-4.4259 Y-.5704
X-4.4355 Y-.5664
X-4.4462 Y-.5648
X-4.4903
Y-.6852
X-4.4462
X-4.4297 Y-.6817
X-4.4259 Y-.68
X-4.4101 Y-.6666
X-4.3998 Y-.6475
X-4.3963 Y-.6253
G0 Z.1
X-4.6516 Y-.6852
Z.02
G1 Z-.005 F15.
X-4.7231 F22.
X-4.7146 Y-.667
X-4.7134 Y-.6653
X-4.698 Y-.651
X-4.6793 Y-.6374
X-4.6648 Y-.6221
X-4.6551 Y-.6068
X-4.6516 Y-.5932
X-4.6544 Y-.5814
X-4.6619 Y-.5722
X-4.6729 Y-.566
X-4.6861 Y-.5637
X-4.6974 Y-.5653
X-4.7077 Y-.5703
X-4.7158 Y-.578
X-4.7202 Y-.5881
G0 Z.1
X-4.7741 Y-.5648
M84 <------------------repeat
Z.02
M8 <------------------repeat
G1 Z-.005 F15.
X-4.8259 F22.
X-4.8365 Y-.6253
X-4.8237 Y-.6156
X-4.8076 Y-.6126
X-4.7935 Y-.6153
X-4.7817 Y-.623
X-4.7736 Y-.6347
X-4.7704 Y-.6492
X-4.7737 Y-.6641
X-4.7822 Y-.6757
X-4.794 Y-.6836
X-4.808 Y-.6863
X-4.8192 Y-.6847
X-4.8294 Y-.68
X-4.8375 Y-.6727
X-4.8431 Y-.6631
G0 Z2.
M5 <-----------missing
G91 G28 Z0.
G90 G53  X-32. Y0.
M30

Z2G is the best way for someone to assist. Helps prove your a legal user and allows someone to poke around in the post to see what things might have been done that help or hurt the process.

Link to comment
Share on other sites
crazy^millman Veteran

crazy^millman

Posted
Posted

I recommend going to the tech exchange on the Mastercam Website and getting the latest post from there. The one you have has not been updated for over 6 years. I suggest you get a hold of your dealer and get In-House to get you the IKE version of their Post for MPMASTER. You are asking for redundant coolant output. Not sure where why or how you think you need that on CNC Machine that have been around for at least 30 years calling the coolant one for a tool going between features on a part if good enough.

Need to change the output in the null toolchange section of the post to always output the coolant verses the current method which is to only do it as needed for each operation. Since this is the first time in my 20 years of being on this forum seeing such a request I am not sure how to help. Maybe someone else can assist with adding the on and off for each operation using the null tool change process. I was going to point you to use CANTEXT to control this, but that doesn't work. I could use a mi or mr trigger in the post to change Force toolchange when using the same tool to mimic things to change some outputs, but again not following the logic behind this request since I Air on with the first operation and then coolant with the 2nd operation. If you want to force off the air between operations without a force toolchange then use a Manual Entry or a Point toolpath between them. 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...