Space Mouse Pro does not work in MC 2023

[jeremy7440]

Hey.  I have a 3D Connexion Space Mouse Pro that does not work with MC since I changed to a Windows 11 computer and MC 2023.  Yesterday the spin functions of the space mouse would work, but none of the buttons would function.  Today none of the Space Mouse functions will work in MC.  I also have Solidworks running on this machine and the Space Mouse works fine in this environment.  I am running the latest driver from 3D Connexion.  Has anyone else run across this type of issue?  Do you have any suggestions for fixing it?

 

Thanks!

[MWearne]

Working in 2023 on W11 here, on the latest drivers.

I had some bad behaviour from it once a while back, I either restarted the program or restarted the computer and all was good.

Sorry not much help other than letting you know it should be running fine in that config.

[jeremy7440]

30 minutes ago, MWearne said:

Working in 2023 on W11 here, on the latest drivers.

I had some bad behaviour from it once a while back, I either restarted the program or restarted the computer and all was good.

Sorry not much help other than letting you know it should be running fine in that config.

Thanks for the confirmation.  I am currently working through 3DConnexion support via email.  I will report back here if we figure something out.