Can i hide the toolpathes before i make a new one ?

[epeng]

Thank you very much !!!

have a good day !!!!

[DavidB]

Hi,

Welcome.

 

Im not sure if thid is what you are looking for but give this ago.Press the ALT key and the T key together then F3 this will turn off toolpath display and refresh your screen.

 

[Jean-Simon]

Not sure about what you really want but have you tried ALT+T should do what you want. Welcome to the forum.

 

Simon

[epeng]

Thank you very much.

ALT+T really works

[epeng]

Thank you,Thank you Mr. DavidB and Mr. Jean Simon

[Mike Mattera - TFM]

When your in the Operation Manager, select the operation and press the letter T. With this you can turn on/off and individual operation. If you look at the icon for the tool path, you'll see it "gray out" signifing that it's not visible.

 

Some other cool one's while your in the Op Mgr.

E = Expand or contract the operations list.

L = Lock the selected operation. Useful in case you need to modify the geometry, but dont want the toolpath to change. Changes the icon to a Lock.

P = Turn on/off posting for the selected operation. Changes the icon to a Ghost.

 

 

Mike Mattera