Colour of drill toolpath in graphics view Mastercam 2023

[ChrisVermaak]

I use white background

However when marking points for drilling the view of toolpath created is in this pale yellow which I can barely see.

How can i change the coulor such that it would be more visible and I do not miss points I should have selected

Picture below should indicate what I mean. There is a toolpath for a 8 mm cutter along a straight line quite clear to see. But the two holes to be drilled indicated in the obscure (missable) yellow. I just want to change that yellow colour and cannot find anywhere in configuration or where ever to do this 

Please help if you can.

[AHarrison1]

File - Configuration - Colors - Advanced Toolpath Display. Change Rapid retract motion (2nd one down) should do it. 

[Leon82]

I use the black background

[Fretless]

I use black / grey  Background 

File>configuration>colors>

Background (gradient start)>

Background (gradient end)

Hope this helps!

 

[jpatry]

On 8/30/2023 at 12:27 PM, ChrisVermaak said:

I use white background

However when marking points for drilling the view of toolpath created is in this pale yellow which I can barely see.

How can i change the coulor such that it would be more visible and I do not miss points I should have selected

Picture below should indicate what I mean. There is a toolpath for a 8 mm cutter along a straight line quite clear to see. But the two holes to be drilled indicated in the obscure (missable) yellow. I just want to change that yellow colour and cannot find anywhere in configuration or where ever to do this 

Please help if you can.

Uhh, by default rapid moves are yellow, and feed moves are blue.

Are you intending to drill in rapid, or what else is going on here?