Small Menu Font, Broken Text

[harpoon]

Hello! I just got started using MasterCAM after a fresh install and noticed that a lot of the menus I try to open either have really small font or just broken menus (see pictures attached). Does anyone know the solution to this issue? I'm kind of stumped and couldn't find a similar issue on this forum, or I just didn't know how to exactly phrase the problem in the search bar. 

[gcode]

What kind of monitor are you running

I have a Dell34" curved screen and it's native resolution is  3840 x 2160

Mastercam ran OK at that setting but the text was way too small for my ancient eyes

I'm running it at 2560x1440 and 100% Scale and it's fine.

Also, depending on what version you are running it may not play nice with 4K monitors 

I found this article in the Mastercam  Tech Exchange 

Article 17631

This article described the issue you are having and how to fix it

 

I tried pasting the article here, but that didn't go well

 

[harpoon]

Ah, the solution in that article seemed to do the trick. Thanks a ton!